mteu injector size?

[sam-131]

i was wondering what size are the metu's injectors? also are there any larger ones that bolt in ?

thanks
Sam

[wilbo666]

182cc I think :S (not sure on that)

I think XF falcon are close to a bolt in (serach on the old forums...), also not 100% on that!

ed_ma61 (now ed_jza80) was involved in looking at it...

Cheers
Wilbo

[ed]

anything can be made to bolt in... but why?

what do you need the fuel for?

[sam-131]

i got a new daily mz10 and i just got a 5me off viper(james) so the plan is to use the manifolds off the mteu on the 5m to make a 5mteu i an i was thinking that the mteu injectors might shit them selfs so thus me wanting to now what would fit

i heard that 22re injectors might fit any ideas?

[wilbo666]

I doubt the stock 5me ones will struggle...

Cheers
Wilbo

[ed]

dude - any injector can be made to fit
run the 5me intake manifold and the 5me injectors and rail
run the mteu exhaust manifold

adjustable fuel pressure reg will get you a few extra bits of juice, or go to the xf injectors

search the old site for more info

[sam-131]

what ecu would you run mteu's or the 5me's? i plan on on playing with the afm later on to tune i slightly

[ed]

just run the 5me ecu
forget the afm fiddle

just get a pwm unit from jaycar - much better way to play

[wilbo666]

I'd prbly try and run the mteu one... the mteu one has an o2 sensor input...

Cheers
Wilbo

[ed]

yeah, but itll be mapped for ?smaller injectors and on 2L versus the 5me inj and 2.8L

[sam-131]

hmmmm thats what i was thinking also thats why i said i would fiddle with the afm to richen it up a bit meh but if i run the 5me ecu i would need a 5me loom and re wire the sourarse

[wilbo666]

yeah, but itll be mapped for ?smaller injectors and on 2L versus the 5me inj and 2.8L

I was under the impression that the injectors were the same...

I suspect both could be made to work

Cheers
Wilbo

[ed]

true that... it does only run fuel afterall...

which brings me to: dont forget to swap the mteu dizzy over = boost retard

[sam-131]

note taken i've been reading up on the old forums about it but it dosnt say anything about the xf injectors are they a straight fit? go easy on me i am a newbie to efi

[ed]

http://forums.toymods.org.au/index.p..._view=&start=0
http://forums.toymods.org.au/index.p...art=0&count=60

its possible that other info is on the OLD old forums - i have no idea where that forum is anymore...