3TGTE airfilter set up?

**RiceburnaGTV** · 13-09-2006, 11:41 AM

Hey guys im just wondering if anyone can post some pics of their intake set up for 3tgte and what sort of bends/piping you used to get it how you wanted?

I have a highflowed ct20 and rush air filter but they dont seem to be spot on 2.5"turbo inlet and 3" filter inlet...They are mongy sizes...

Is there somthing from another car that fits?Can I use rubber joiners?why do i still have this rash?..............oops sorry wrong forum

Thanks in advance,

Nath

**lilcrash** · 13-09-2006, 08:26 PM

u buy a 2.5-3 inch rubber joiner and screw that on.

if u want a pic of mine let me know

laterdays

**RiceburnaGTV** · 13-09-2006, 09:18 PM

Originally Posted by lilcrash

u buy a 2.5-3 inch rubber joiner and screw that on.

if u want a pic of mine let me know

laterdays

Yep a pic would be really good mate

cheers

**WDE_BDY** · 13-09-2006, 09:38 PM

From a thread posated yesterday -

http://intakehoses.com/Merchant2/mer...gory_Code=RSS1

**fade-e** · 13-09-2006, 09:40 PM

i did a dodgy for mine... i got a 2.5" hose, cut 10mm off it and used it as a spacer... so what i get is...

2.5" SS pipe > 10mm 2.5" hose > 3" air filter neck tightened with hose clamp

nice and simple

**The Witzl** · 14-09-2006, 12:46 PM

just buy one of those 2.5"->3" 45deg silicon bends from Ebay.... they will do the trick nicely.

**RiceburnaGTV** · 14-09-2006, 07:46 PM

Originally Posted by The Witzl

just buy one of those 2.5"->3" 45deg silicon bends from Ebay.... they will do the trick nicely.

Thats what im thinkin Karlholio...

**lilcrash** · 25-09-2006, 07:23 PM

sorry for the delay in picture.

http://img145.imageshack.us/img145/5705/1151580is9.jpg

u will notice that i have got both the 2.5-3"joiner and the air filter touching, there is about 2 inches of 3inch pipe inside them. good luck