1jzgte TPS check

**triptek** · 17-09-2006, 09:35 PM

Anyone know how to check if the TPS is workin properly on a 1jzgte. Does somone know the resistance value's.

Cheers

**82MKII** · 18-09-2006, 02:43 PM

Triptek,
have a look at http://mkiv.supras.org.nz/articles/engine_2_41.htm
Unfortunately it is for the 2J, but there is a pretty good chance the resistance values (for the TPS and not the sub-TPS) are the same. Is anyone able to confirm the resistance values are the same?

Regards

Peter

**wilbo666** · 18-09-2006, 06:45 PM

I set my 1jz up using the 2jzgte values once...made it stall when i came to a stop...

I can't remember if I reset the ECU tho...

Cheers
Wilbo

**triptek** · 18-09-2006, 09:58 PM

Thanks guys it's all fixed.

**urantia** · 18-09-2006, 10:03 PM

triptek, can you elborate, did you use the 2jz tps settings to fix it?

after what wilbo said i'd like to know for sure if the 2jz tps settings are ok to use on the 1jz tps.

**triptek** · 18-09-2006, 10:21 PM

Wasn't the tps mate. It was a huge vac leak through the injector ports on the manifold.

**triptek** · 18-09-2006, 10:23 PM

Also i did compare the 1jz tps specs to my 2jzgte one and they were the same.

**urantia** · 18-09-2006, 10:25 PM

np, glad you got it sorted.

(still if anyone knows for sure about using 2jz tps settings on 1jz would be appreciated and pos repped)

(you snuck a post in there before i posted this)
well then sounds like you've answered my question plus rep for you)