What about a pedal box setup from Wilwood, Tilton etc?
MAte ive just done the conversion on my KE10 using the early galant M/Cyl.Originally Posted by Bretto
GD disk/drum master cylinder and you will need the brake lines from a ke35 up as you need longer ones fro the front.
What about a pedal box setup from Wilwood, Tilton etc?
Race Car: Hyundai Lantra Super Touring Car
Road Car - Ur Mums VX Commodore.
$$$$$$$$$$Originally Posted by ROTFL-ACT
and need to check it will be legal..
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
yeah for sure it costs a bit, just trying to think what would be an easier solution
Still got my Tilton Pedal box which im iching to use somewhere hehe
Race Car: Hyundai Lantra Super Touring Car
Road Car - Ur Mums VX Commodore.
TurboKe20 - Please if its not too hard could you post a pic for me? You have a 4agte right?
How easy does your master clear the inlet manifold?
Madrolla - Is the early galant a Tandem system? And how long is the length from firewall to end of master? Can you get these with remote res?
ROTFL-ACT How much do the tilton pedal boxes cost? I would say these would have to be a dual or tandem system right?
Well the car is at a Brake specialist. Thinks he can get the right parts for a basic swap he said, hopefully won't cost too much. He is trying to find another master cylinder, but dont really like his chances. We'll see how it pans out. All i know is my current single circuit is all over the place, i definatly need to clean all the brake lines up.
Bretto
KE20 - Soon 2 b gte!
Ok its a dual circuit cylinder and its 185mm from firewall to end of cylinder ,you could make it remote res if you really wanted to i suppose.Originally Posted by Bretto
Try a early (pre 88 or so ) Range Rover, they are dual circuit and will definatly fit in the length, not sure about the other measurements though.
Friends
ed_jza80 has not made any friends yet
Well the car is at a brake place. The owner of the workshop is doing the work for me, and he has said that he has found a master cylinder.
Ok, here's the quote.
$303 - master cylinder
$88/ph - labour for 6 hours
Looking at just over $800 he said.
Personally i almost cried cause i thought i would of been able to get this done for under like $400. But seems not.
I do have the money for it, but just dont want to be giving free money away if i know i can get the part and get someone elso to do it for cheaper!
What you all think?
P.S does anyone have the dimentions on the 1988 Range Rover 3.5 Brake Master. As i think this ine looks like its short enough, but just want to make sure.
How much have your master conversions cost? Anyone had to pay around this sort of money?
KE20 - Soon 2 b gte!
No offence ment but fuck me there on drugs! be ok if it was a place that could do all mechanical and was above the ordinary, but 88 and haour he would want to have mills and lathes and alll the best equipment! what a wank.thats the trouble with australia, we have under skilled people with tooling from 20 years ago wanting top dollar! its all a big joke.
Thats exactly what i thought. There's nothing i can do though then try it myslef or get him to negotiate the price. Its bullshit expensive. I do need it to be done in the next week though so i think i might just have to negotiate the price with him if i can!
AAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHH!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
if you can't tell, i'm so far OVER IT!
Bretto
KE20 - Soon 2 b gte!
brett it isnt a place at campbelltown or near minto is it?
Nar mate its near or in Hornsby!
Just on George st. I'm hopin it will be cheap though.
Range rover masters are usuallu around $200
KE20 - Soon 2 b gte!
Far out dude, im just about to switch my master cyl over to unboosted, and its like $80 for the Datto 240K master (7/8") and then maybe another $20 for a plate, bolts and other bits and an actuator out of an old clutch master.
$800 is a rip and a half.
-Chris | Garage takai - Breaking cars since 1998
Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence
Have you got a remote booster? if so give me exact measurements for the master and ill see what i can find!Originally Posted by Bretto
You north shore?
Ok, did some rough measurements for the 240K master, its 175mm in length from the back of the flange to the extent of the bore. Cost was $77 at trade.
-Chris | Garage takai - Breaking cars since 1998
Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence
Bookmarks