The 3S-GE dizzy setup is exactly the same electronicly as the 3S-GTE! The only difference between Gens is the way the pickups are mounted and possibly the connector!
Hey, does anyone know if a 3SGE crank angle sensor can be used for a gen 3 3SGTE?
Basically I just want to know if they are compatible, , are the wires and the operation the same and will the computer have a fit?
The 3SGE CAS is not going on either a 3SGTE or a 3SGE, it's going on an 18RG using a Gen 3 3SGTE loom and computer.
Strong like horse, smort like tractor!
(\__/)
(='.'=)
(")_(")
The 3S-GE dizzy setup is exactly the same electronicly as the 3S-GTE! The only difference between Gens is the way the pickups are mounted and possibly the connector!
I'm actually using a GE dizzy on my GTE
So it works then, excellent.
Would you call it a purely "bolt up" conversion?
That would be ideal.
Strong like horse, smort like tractor!
(\__/)
(='.'=)
(")_(")
The alloy casing is exactly the same so it will bolt up no problem.
Well that is very good news, thanks.
Strong like horse, smort like tractor!
(\__/)
(='.'=)
(")_(")
Bookmarks