2JZGE into MX83

[ed]

ive got a manual 2jzge ECU and loom (complete) if youre interested - pulled it myself, so its all there...

[rvrolla]

Possibly in the loom, the auto's rely on the same ECU or seperate? I am definately after an auto. CVAP has a 2JGE without loom and ECU.

Prvt msg me how much ou would be after.

[CrUZida]

Auto ecu is intergrated into engine ecu.
You'll need an auto loom.

[rvrolla]

Thanks champ.

[petespipes]

regarding the compressor.The 1j into MX83 required only swapping the cover plate off the top oif the compressor where the stock MX83 hoses attached.Made it nice and easy as altering hoses is a pain.It may be that simple?

nudge my rep please...........

[menace]

Any Updates?

[PlacentaJuan]

i think he sold his car

[madmont]

regarding the compressor.The 1j into MX83 required only swapping the cover plate off the top oif the compressor where the stock MX83 hoses attached.Made it nice and easy as altering hoses is a pain.It may be that simple.

I have just put a JZA80 2JZGE into an MX83. The plate off the 7M air con compressor fitted the 2JZ compressor but I had to cut away part of the power steering pump mounting bracket to clear the lines.

[cambelt]

correct you have to cut the p/s braket to clear , much better to get custom lines made .
Dave

[takai]

Im just about to do mine.

[madmont]

I had to cut away that part of the bracket with the screw thread in it . Was no big deal really. I cut away part of the pump housing so i could use a nut instead. Here are the mods I had to make to fit the 2JZGE speed sensor to the MX83 ABS rotor and MX83 extension housing which I fitted to the 2JZGE transmission . ABS rotor has had 4 slots cut into it for the speed sensor.

[takai]

From memory most of the people with 1JZGTEs didnt have to cut away parts of the bracketry to fit the pump and MX83 aircon piping. Now, if im using 1JZGTE aircon/ps would i have to cut them away too?

[madmont]

Here are the colours of the wires and their functions on my MX83 GRANDE loom plugs from 7MGE motor to underdash plugs
White plug
yellow with brown spots___________ speedo speed sensor
brown _________________________ speedo speed sensor [make sure you earth this one]
yellow_________________________ temp sensor
black__________________________ tacho
yellow/blue _____________________ oil pressure switch
red/green [2] __________________ reverse
green__________________________ park
red ___________________________ neutral
blue___________________________ drive
light green______________________ 2
pink __________________________ L
Square grey plug
small black/white _______________ AC clutch
blue/red_______________________ FP diags
black/red _____________________ +B diags
red/black _____________________ 12v supply for speed sensor etc
big black______________________ nsw
big black/white _______________ nsw from start relay
light green ____________________ goes to purple/white in other grey plug
green with spots _______________ tccs diode
green/white ___________________ stop light switch
big black/yellow________________ power from ignition
small black/yellow _____________ solenoid 2 in transmission to cruise control ecu
green________________________ from airflow for circuit opening relay
black _______________________ from temp sensor on water inlet to start injector
Rectangular grey plug
pink__________ _______________ TE1 diags
brown/black __________________ earth
pink/green__________ _________ TE2 diags
grey________________________ VF1 diags
purple/white__________________ goes to pink. and light green in other grey plug
grey/green___________________ brown wire on abs sensor
pink/blue ____________________ grey wire on abs sensor
purple ______________________ blue wire on abs sensor


Wires from 94 model Supra 2JZGE motor to under dash loom plugs
black/orange__________________ +12v
blue/red _____________________ speed sensor
yellow _______________________ +12v
red__________________________ speed sensor
yellow /green__________________ alternator warning lamp
brown________________________ radiator temp?
black with spots _______________ air con
green/yellow __________________ air con
purple/white __________________ air con
green with silver spots __________ oil level
brown with silver spots__________ oil level
yellow/blue___________________ temp sensor
grey_________________________ trans indicator park
green/red_____________________ trans indicator drive
blue_________________________ trans indicator neutral
red/black_____________________ trans indicator reverse
black/white___________________ trans indicator neutral start
light green/red________________ trans indicator 2
green/black __________________ trans indicator L
green/red ____________ ______ plug near alternator
green/black __________________ plug near alternator
yellow/ black__________ _______ oil pressure switch
red with silver spots____________ from tps to cruise control
DIAGNOSTICS connector wires
blue ________________________ WA
pink________________________ TL
black/yellow__________________ AB
yellow/blue___________________ TE1
yellow ______________________ TS
blue/red_____________________ FP
black/white __________________ IG- tacho feed

[takai]

Cheers mate. +rep

[madmont]

My conversion is going well. The only issues I have is the cruise control does not work and I have no kickdown switch which is not really a problem. I think I may need another connection to the ECU for the cruise to work. ABS works ok.