Injector's what size is what.??

[river]

Hi,

Stick in some 400-500cc units and stop pussy footing around.

seeyuzz
river

[GA61XX]

Hi,

Stick in some 400-500cc units and stop pussy footing around.

seeyuzz
river

That sound good... But i need to be able to control them down low...

remember i'm doing this with a Stock ECU...

i would may be go around the 300cc ... & that is llooking like i need to find a set of 7M-GE 295cc Yellow....
But as i'm putting out close to the power of the 7M-GE motors.. & looking for more i just need to take small steps..

..

..

[Omegaman]

don't go any higher than 400cc. it just won't idle on std ECU.
i know i tryed on my 18rgeu.
Even 360cc had issues, unless you get something to control them as you say.
my std are 210, but when i put 240cc she run nice. even with only 35-38 psi fuel pressure.
Now that i have rising reg the 360cc are going to get another go, with 45psi fuel