Where Do These Hoses Go (4AGE)

[Schmitt]

Hi guys
As the title says i am wondering where these hoses/pipes go on the intake.
If anyone could let me know that would be much appreciated.



Thanks
Ben

[roadsailing]

the top ones are vacuum leaks that you should plug up (unless you are using a crharcol can, in which case the one that says C or something on it should go to the charcol can)

the bottome two are coolant hoses, they control the cold idle bypass. if you don't hook these up you will have a high possibly hunting idle and will need to plate off the idle bypass all together.

[TopSecret]

Plug the blue one, run the yellow to the charcoal canister, plate off the idle up valve then with the bypass on the side of the block run a hose from the inlet to the outlet of it.

[bmak]

too me it looks like the red arrow is pointing to the power steering idle up connection.

The water hoses would be pointing down not forward.

[takai]

The water hoses are actually plugged up already in that picture there.

[bmak]

The water hoses are actually plugged up already in that picture there.

I dont think so, they would be for the air con idle up?

Ive marked the water hoses with the green arrow

[bmak]

Actually now i look closer the 2 that are blocked would be for the power steering & the unblocked 1 for air con.

But to answer your question they are not needed so they all should be blocked.

[Schmitt]

Hi

Sorry to dig this up but what is the best way to block off these hoses. The red one i can buy another of those caps but what about the others. Is there something similar i can buy for them.

Thanks
Ben

[takai]

The easiest way is to get a little bit of vac tube and put a selftapper into it.

[bmak]

You can silicon caps in all sizes that look a lot neater

[TopSecret]

Or you could plate the idle-up valve off and those fittings will disappear with it.