1gg single turbo manifold pictures.. its built! pics added

[1jzracing]

just about to build a single turbo manifold for a 1GG

i finally have all the parts .... very hard to find 1 3/8" (35mm) stainless tube and bends!!!

if anyone knows where to find or has pics of tube manifolds please post up or link so i can get some layout ideas

cheers

[SIKTOY]

Ill get some of mine tomorrow and email them to you if you like

Cheers
Ben

[Big rob]

could you please post the pictures

[1jzracing]

edit: ...oops wrong thread, havnt received them yet

[GTtwin]

Let me know if you want any others.

[1jzracing]

cheers....

turbo position looks MILES from the block!
have you had that in an engine bay? hows clearance on the strut tower

ill try to have it tucked in next to the cam cover between the oil feed and that little tag sticking out ... sits in there nicely

[Pube]

probably not the sort of manifold you want pics of but heres a HKS manifold.

[GTtwin]

Mine is a Blitz, has got real long runners but does clear the strut tower by a few inches in the GZ-20.

[Screaminrolla]

[ekoston69]

Let me know if you want any others.

Dude what turbo/manifold is that?

[SIKTOY]

[stradlater]

there's some pictures of the manifold on my website

http://www.stradlater.com

[1jzracing]

there's some pictures of the manifold on my website

http://www.stradlater.com

wow .... how laggy is it with that sucker on there!! ... bet it goes well once it gets up though

some great pics and some torturous gass flow paths too, great to see keep them coming

cheers

[SIKTOY]

here is another one

[Joshstix]

Damn Jason does some nice manifold work.

[SIKTOY]

Damn Jason does some nice manifold work.

Yes Yes he does

[stradlater]

I'm glad you found the site useful :-)

I"ll post more pics as I get to it
but yes, it does get up and boogie when it does come on. :_)

[GTtwin]

Dude what turbo/manifold is that?

As stated above, Blitz with a KKK K26.

[romelan]

Here is another approach, middle mount turbo setup.

Pros:Short equal lenght runners with 1.5" stainless steel tubes and collector.

Cons: Difficult to fit on engine bay, very tight space with the chassis

I think that Screaminrolla design is the better setup.

[YelloRolla]

Yes Yes he does

Shucks, thanks fellas. I will attempt to post some more pics (at a later date, cos I am a gumby) of SIKTOY's manifold that may better show the angle of how the turbo sits. This manifold uses small diameter runners to increase the gas velocity and improve the response time, afterall we are only dealing with 330cc/cyl.