Nope, but if you know the thread pitch and diam I can make one
RM.
im looking for a billet oil cap at the moment. all the ones i like on ebay are not to suit a 4age.![]()
Does anyone know of an oil ap that is the same thread but off a nissan or honda ETC ETC ???
300+rwkw 4agte http://www.toymods.org.au/forums/for...wkw-4agte.html
Nope, but if you know the thread pitch and diam I can make one
RM.
lol ill get you one tomorro when i remmeber my suppiers mane!lmaoOriginally Posted by 30psi 4agte
there about $40 for a billet anodised one in red,blue or polisged with an oring and cap screws.
have one for mine! there very very nice
ill PM you the number tomorro!
those cams are a bit small![]()
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
purfect size for loosening up the short motor! have to season the bores![]()
BuddyClub sells them for $85
thats the one i have and currently use
Performance Through Technical Supremacy
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
hehe
Hey, that IS pretty tooI love all the anodised fittings on the motor, dammit but they're pricey though! What're the specs of the motor when it's done? (might get some ideas for mine
)
RM.
vn throttle body on top as well...
nothing special!just the run of the mill 4agOriginally Posted by mullett
![]()
close but no cigar! its a new one of the last of the VT clubsports!Originally Posted by Grega
VT clubbies ala 304?
65mm?
yes, thats the one. bit small but they do the trick!
Originally Posted by kingmick
hmmmm why dont i believe that one![]()
Did ya get the p.m mick
300+rwkw 4agte http://www.toymods.org.au/forums/for...wkw-4agte.html
sure did![]()
Bookmarks