Hello all,

Forgive me if this has been detailed in another thread, ive read through everything i could get my hands on, and many have broken links or are vague.

Im doing a blacktop 20v swap into a sprinter carib (4wd ae92) both of which are imports up here in canada. Ive gotten to the wiring stage of the swap and have everything i need completed on the ae92 side of things as i have those wiring diagrams.

what I dont have are any wiring diagrams on the ae111 side of the loom, specifically three connectors from the engine that reside next to the PCM conectors, Ive figured out which is the starter wire but nothing else.

The connectors in question:





Im sure quite a few of the wires are powers/grounds for sensors and signals for the combi meter but i dont know which is which.

If you have a factory toyota wiring diagram i would be most grateful, ive checked quite a few of the blacktop FSMs available online, but none have the actual schematics i need.

thanks!