Full nuts and bolt list for 2t/3t?

[ctrain]

Im rebuilding my 2t/3t hyrbid and i want to replace all the bolts, unfortunatly im missing alot, if anyone has a list or knows from experience it would be appreciated.

Cheers,
Callum

[Hurricane]

as in you wish to replace there with all new nuts and bolts?

if so keep in mind it might be hard to get some sizes new and the hex heads might not be the same size.
ive had some issues in the past with say the OEM bolt was a 17mm hex but the Nuts and Bolts supplier could only get 19mm hex head. or 16mm not 14mm, etc. can get annoying for beelhousing bolts.
somthing about the sutomotive industry being the only ones using certain sizes.

[ctrain]

yeah i was thinking of replacing all the bolts/nuts/studs that you can see basically, mainly for looks since im respraying the block and covers. ill try an exhaust shop for the studs n nuts cos i know they do the sizes cos nuts n bolts on fyans street dont do stud apparently

[Hurricane]

lengths i dont know of the top of my head but inlets are M8x1.25, exhaust is M10 x 1.25, rocker cover M6 x1, water pump/ thermostat/ timing cover M8 x 1.25, sump M8 x 1.25
I think they can get studs but need to be ordered in, so you might need a full box?

The nuts with 14mm hex they can get as i just got some afew weeks back.

I always run studs on inlet, exhuast, sump and rocker cover. never bought new though, alwasy removed them from other motors or made them.

There is another nuts n bolts supplyer in geelong but i cant think of the name atm.

[Hurricane]

Coventry Fasteners
8 Tarkin Court
Bell Park VIC
(03) 5277 2063

or they are heaps in melb that can, just need to do some ringing around

[ctrain]

sweet man cheers, ill suss em out!