1uz ISCV Plumbing

[bmxer54]

Hey guys im just a little curious as to whether I can run a beather filter on the iscv or whether it will need to run to the piping between the afm and the throttle body?
some pics for reference



Cheers, Peter

[RA35GT]

Mate, it needs to run from the piping in between the throttle and AFM.

The idle valve just bypasses air around the throttle to change the idle speed. (Thus it needs to get air from before the throttle)

In order to measure that extra air and fuel accordingly the air needs to go through the AFM first. (Thus after the AFM)

[bmxer54]

Cool thanks for that. That was my suspicion too, just wanted to see if i could cut a corner and make life easier for myself. all good I'll find a hose and get a barb welded into the ally

Cheers, Peter

[bmxer54]

and.... Done

[RA35GT]

Looks good man!

[cuttz]

neat install! whats the 1uz in mate?

[cuttz]

also notice the clutch master cylinder manual would be fun

[litldv8]

do I win?
it looks like a st141 corona engine bay to me

[lexsmaz]

I second that opinion & it looks neatly done ..

But I would have gone down the 1jz route as they fit in

[bmxer54]

Yeah its an RT142 SR, coilovers, hilux diff, r33gtst calipers, heaps more thats not coming to mind right now, Should be fun

[cuttz]

Oh very nice mate.
Race is on then best get mine finished

[SumKid]

Hey Pete, if you need to look at a stock uz at all il be at the beer o'clock tomorrow with the lexboat.