4agze injectors in 20v?

[kiwi]

Hi,
I have a 20v engine and have a set of gze injectors with fuel rail. Would they fit onto the silvertop? What else do i need to make them work as they are bigger then the stock ones and in good nick.

Thanks

[trdee]

you need a custom fuel rail as the 20v engine uses side feed injectors, and 16v engines (which your gze injectors are from) use top feed injectors.

[kiwi]

I have the 4agze fuel rail, would that work?
OR the other option is to use a set of lancer GSR 390cc ones, would they be a better option?

[trdee]

i dont know but i doubt it. give it a shot

[adamaw11]

Are you unable to get hold of any other side feed injectors?
I'm using 550cc 3sgte side feeds in my blacktop and they work fine.

I can't see how it would be worth modifying the fuel rail to fit top feed ones even if it was possible.

[Stolic]

if you're keen hit up Bazda @MRP... he's just machined his black top inlet mani to take top feed (1200cc i think) injectors.

Tho probably cheaper to just get some sidefeeds in your case, unless you decide you need massive fuel

[Celica RA45]

you can also use 2jzgte 1s as well they are side feed

[Sam_Q]

As above, 1JZ and 2JZ both work.

No top feed injector will unless you go out of your way to adapt it. Fitting a turbo?

[jonathan yee]

gen2 3sgte injs are side feed 440cc and cheap as chips.