Well,just bolt them down and check the valve clearance to be correct (quality cams can be swapped straight away;the base circles and same)
Gday toymodders just a quick question in relation to cams
I have a pair of 264 degree cams from a 7mgte I was just wondering if.they are a direct bolt up affair into a 7mge obviously other work is needed with lifters etc but just in regards them selves they should bolt straight in and be a decent up grade?
Thanks in advance
Well,just bolt them down and check the valve clearance to be correct (quality cams can be swapped straight away;the base circles and same)
GE and GTE exhaust cams are identical. Only the intake cams are different. So just change the intake.
Yep they will bolt in no problem, not sure you are going to see positive results from them though seem as they are designed to work with a turbo motor
1989 white supra 7mgte manual
http://www.toymods.org.au/forums/for...pra-turbo.html
Bookmarks