Microtech LT10s 20v silvertop wiring help

[red_rolla20v]

Ok almost fixed...finally got a chance to wire dizzy properly so ive got injector pulse, but i still don't have spark...

There must be something ive missed? Ive got the IGT signal wired to the microtech and TACH. It has an ignition feed to the igniter but i have no negative pulse to coil...any ideas? Thanks

[dumbass]

sounds like the ignitor is not grounded

[red_rolla20v]

Its grounded to the chassis already

[red_rolla20v]

Finally got around to spending time on it and figured it out...whoever i bought it off did his own "modifications" to the cicuitboard. Its fucked. Now to contact microtech see if they can repair it or just buy another one, brand new this time -.-

[dumbass]

its around 400 to 500 to repair
they do this so its better to just buy new one
find a shop or friend who buys a lot fo microtechs
might be easier to go thru them
get them to send it to microtech
most fo the time they cant be fkt fixing it