Results 1 to 6 of 6

Thread: R series transmission compatibility

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Apr 2011
    Location
    nsw
    Posts
    7

    Default R series transmission compatibility

    I have a 2008 Hilux 2wd with a R150 gearbox, Its a 2-tr-fe 4 cylinder(looking to turbo it)
    Basically the gear ratios suck.
    Would the R154 out of a later model supra bolt onto the same housing or motor??
    As that has a much better spread of gears.

    I can't seem to find and info on whether or not would have similar or the same bolt patterns.

    Thanks Josh

  2. #2
    Junior Member Too Much Toyota dnegative's Avatar
    Join Date
    Oct 2009
    Location
    NSW
    Posts
    5,491

    Default Re: R series transmission compatibility

    Maybe;
    It will bolt to your bellhousing but R150's have two different input shaft lengths, 160mm/190mm but yours being a late model, would say its 190mm.

    Make sure you buy a r154, seen a few people (and shops) selling late model R150's as R154's and charging 3x the price.

  3. #3
    Junior Member Backyard Mechanic
    Join Date
    Nov 2007
    Location
    Victoria
    Posts
    333

    Default Re: R series transmission compatibility

    Is anyone able to confirm 2005 on wards 2tr R150 input shaft is 190mm?

    P.S i cant seem to find any useful information

  4. #4
    Junior Member Grease Monkey
    Join Date
    Jun 2010
    Location
    Qld
    Posts
    137

    Default Re: R series transmission compatibility

    Nope sorry, i have had both 2WD r150 (2tr) and r151 (1kd) and they are the short input shafts 160mm. however i am unsure what the r150 from the 1gr (v6 petrol) has, its a different part number for the input shaft so i suspect its longer so the heads clear the the firewall maybe? dont know, not many for sale and when they were for sale none of the wreckers would measure it for me haha

  5. #5
    Junior Member Backyard Mechanic
    Join Date
    Nov 2007
    Location
    Victoria
    Posts
    333

    Default Re: R series transmission compatibility

    Phew I almost bought one. Looking online it seems 1gr and 2tr have the ratios. I also can't get anyone to confirm the 1gr shaft length. Everyone on the interweb thinks it's 190mm.

    Can you confirm it ratios are the same, which means input shaft could be swappable

    Thanks

    Sent from my SM-A530F using Tapatalk

  6. #6
    Junior Member Grease Monkey
    Join Date
    Jun 2010
    Location
    Qld
    Posts
    137

    Default Re: R series transmission compatibility

    well going by the part numbers on toyodiy, the 2tr r150 and the 1gr r150 box has the same lay shaft, so id say yes the input shaft could be changed

Similar Threads

  1. Replies: 8
    Last Post: 20-08-2017, 10:11 AM
  2. E-series transmission interchangeability
    By TheRisingSunset in forum Tech and Conversions
    Replies: 45
    Last Post: 19-02-2015, 08:23 PM
  3. A-series bellhousing to OLD T-series transmission
    By Toycrash in forum Engine & Driveline Conversions
    Replies: 12
    Last Post: 21-06-2008, 05:24 PM
  4. G series rear diff compatibility?
    By grotty100 in forum Tech and Conversions
    Replies: 4
    Last Post: 09-06-2008, 01:12 PM
  5. Y series transmission swap
    By nedm in forum Tech and Conversions
    Replies: 15
    Last Post: 13-02-2007, 10:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •