3SGE for the love of god

[molllydooker]

For the love of god can anyone please tell me where I can source bolt on gear for a Beams motor?
I would like to get a dry sump pan to start with then the pump is easy sorted but blanking plates etc..as it's going into a boat so forget all the normal car stuff.

quad Throttle bodies. Is there a bolt on aftermarket set up as I just dont have time to machine up stuff. This thing will have to rev so if anyone can confirm 48mm will do the job please say so. I just cant find anywhere that clearly says "here it is-buy me"

Any suggestions on a simple aftermarket ECU, remember Its a boat, RPM, Oil, Fuel Press. EGT......
Next I will need the Bearing Caps as I want to start with a known quantity.

Thanks for your help

[horse]

PM Glen Booth, aka Celica RA45. he'll be able to suppl you ITB's, adaptor plates, and various other things and give you advice.

ECU, adaptronic works, or you can go motec etc.

quads 48mm is fine, i.e blacktop 20v ones. you can bolt them onto glen's manifold as many have done

[molllydooker]

PM Glen Booth, aka Celica RA45. he'll be able to suppl you ITB's, adaptor plates, and various other things and give you advice.

ECU, adaptronic works, or you can go motec etc.

quads 48mm is fine, i.e blacktop 20v ones. you can bolt them onto glen's manifold as many have done

Thanks kind sir. does he do the sump as well???

[horse]

i know he has dry sumped his engine so i'd fathom a guess and say he'd be able to help you.

[Matty095]

I brought a sump from frazer cars in NZ
im also in the process of making billet alloy 50mm quad throttle bodies
any qusstion PM me

[Celica RA45]

my quads use steel shafts and look similar to these

or this TRD quad throttle set up

[Sam_Q]

I have some gear as well, I will send you a PM