Page 7 of 8 FirstFirst ... 5678 LastLast
Results 91 to 105 of 120

Thread: Drag Day, Wednesday July 5, during SOO 3

  1. #91
    regular fella Conversion King chris davey's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    2,608

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    you have got nothing! I put my spec up on www.dragtimes.com and did some searching.

    I have the MPH for a 12 and the 60ft of a 16.0!
    Quote Originally Posted by MR 1JZ View Post
    that interior is so jap...just looking at it makes me want to kill a whale
    QUICKEST 1JZ'S IN OZ

  2. #92
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    What was your 60ft? My best was a 2.5
    Teh UZA80 - Project Century - Remotely p00'd by association

  3. #93
    Toymods Tuner Backyard Mechanic Forcefed6's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    283

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    well I ran a 12.2@119mph on my first pass, only to have a gearbox failure on my 2nd pass...

    My 60ft was 1.86 and 1.99 respectively
    Z10 Soarer - [email protected] ... 11's soon
    CHECK IT OUT HERE

  4. #94
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    Respect....and damn. What happened?
    Teh UZA80 - Project Century - Remotely p00'd by association

  5. #95
    Junior Member Too Much Toyota RONA's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    7,493

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    Thats damn impressive shame about the box, JCMF you need launching tips off him.
    If in doubt power out

  6. #96
    Toymods Tuner Backyard Mechanic Forcefed6's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    283

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    Broken input me thinks, but I won't know for sure till I pull it out.

    BTW I edited first post with 60ft's
    Z10 Soarer - [email protected] ... 11's soon
    CHECK IT OUT HERE

  7. #97
    Current UZA80 owner Chief Engine Builder JustCallMeOrlando's Avatar
    Join Date
    Aug 2005
    Location
    Western Australia
    Posts
    4,152

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    Haha, indeed. Mine is a case of just needing to stop worrying about the clutch and give that little 2l some big revs to launch on boost.

    Still running those Nitto's?
    Teh UZA80 - Project Century - Remotely p00'd by association

  8. #98
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    Quote Originally Posted by chris davey
    Merc, pfft!

    Thought he was going to bring out the ma61 of death!

    Couple of weeks hey!

    WIlbo: buy a spare single spinner and get a CIG locker. Jam it in there, run a 12 and put the single spinner back in!
    I don't think it is that simple...

    To be honest traction wasn't really and issue, getting it off the line was tho, best 60ft of 2.2xx...(as opposed to the2.09x I ran on my first run ever when the IC pipe blew off!).

    I think that I have a boost leak also, just need to find the thing :S...

    Maybe when I get it a bit better sorted it'll crack the 12's, but I think 13.2 is more likely...

    Cheers
    Wilbo

  9. #99
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    does anyone know the owner of the silver TA? it went like a rocket off the line?

    Wilbos said engine was 3TC with a TO4.

  10. #100
    regular fella Conversion King chris davey's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    2,608

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    JCMF: Mine was 2.54

    Jamie: bad luck about the box mate. Hope you get it fixed soon.

    Wilbo: so were you bogging down or what?

    Charles: I know nothing about these 3tc's but when I was looking at www.dragtimes.com there was a shitload of cars running 3tc's and running VERY impressive times. I am talking 8's and 9's!!!
    Quote Originally Posted by MR 1JZ View Post
    that interior is so jap...just looking at it makes me want to kill a whale
    QUICKEST 1JZ'S IN OZ

  11. #101
    ethanol sniffing Backyard Mechanic adamaw11's Avatar
    Join Date
    Dec 2005
    Location
    Qld
    Posts
    328

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    With the car as I drove it there 14.96 @149kmh bad launch
    After removing spare wheel and muffler 14.745 @150.44kmh 2.113 60ft (I'm so stoked with that run!, prolly not much room for improvement without some more significant mods)
    my best 60ft of the night was a 2.097 which I'm real happy with. A great night overall, I had a ball.

    Anyone know what was in that Sprinter? I lined it up thinking it would be a good race, then it goes and runs an 11.8 with a 1.7 60ft - looked soooo fast.

    I got some short video clips, I'll see if I can upload them.
    http://www.toymods.org.au/forums/showthread.php?t=83259
    '88 A.D.M aw11 '98 4age 20v blacktop
    NA: 14.745@150kmh at willowbank. On E85 with 6psi boost: 13.573@165kmh. ~8psi: 13.187 @169.9kmh. >10psi: 12.9 rod fragments @ 174mm holes in block
    daily: '93 ae101 Levin coupe. Motorbike: '09 Suzuki GSR600: 12.358@179kmh at Willowbank

  12. #102
    regular fella Conversion King chris davey's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    2,608

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    Good job on the 14.7!

    Would love to see any vids you got
    Quote Originally Posted by MR 1JZ View Post
    that interior is so jap...just looking at it makes me want to kill a whale
    QUICKEST 1JZ'S IN OZ

  13. #103
    Plumber Automotive Encyclopaedia Robbos_Toyotas's Avatar
    Join Date
    Dec 2005
    Location
    QLD
    Posts
    859

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    my 60ft was 2.33

    hate to say it, but the AMG is a STOCK 1995 6 cylinder NA....My quickest was a 15.17@ 154km/hr. With 1.23 reaction time (doh!)

    Na, in 1900KG worth of car...i was quite impressed.

  14. #104
    ethanol sniffing Backyard Mechanic adamaw11's Avatar
    Join Date
    Dec 2005
    Location
    Qld
    Posts
    328

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    link to a video

    mr2vswilbo.mpg

    I think I'll see if this works first before uploading the others. They are around 6mb each.
    http://www.toymods.org.au/forums/showthread.php?t=83259
    '88 A.D.M aw11 '98 4age 20v blacktop
    NA: 14.745@150kmh at willowbank. On E85 with 6psi boost: 13.573@165kmh. ~8psi: 13.187 @169.9kmh. >10psi: 12.9 rod fragments @ 174mm holes in block
    daily: '93 ae101 Levin coupe. Motorbike: '09 Suzuki GSR600: 12.358@179kmh at Willowbank

  15. #105
    Plumber Automotive Encyclopaedia Robbos_Toyotas's Avatar
    Join Date
    Dec 2005
    Location
    QLD
    Posts
    859

    Default Re: Drag Day, Wednesday July 5, during SOO 3

    For a side note, that ta22 blew something in the motor later on the nite

Similar Threads

  1. Drag tyres/rims for FWD cars! !
    By _ShadowZ in forum Tech and Conversions
    Replies: 30
    Last Post: 08-04-2006, 08:07 PM
  2. Toymods Drag [racing] Night - Wed 21st September
    By The Witzl in forum Previous NSW Events
    Replies: 4
    Last Post: 05-09-2005, 07:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •