get in touch with brendan.. see if hes keen to do another group buy better than whats advertised online where he works
http://a1turbos.co.nz/mm5/merchant.m...Category_Code=
The niteparts bell is still listed at NZ$700 = AU$550. Cheaper than the start of the year.
'69 KE10 Corolla
'69 RT40 Corona
get in touch with brendan.. see if hes keen to do another group buy better than whats advertised online where he works
http://a1turbos.co.nz/mm5/merchant.m...Category_Code=
-Mark
E2 + E7 fan
'71 KE26 5k, '75 KE25 SR 4agte, '78 KP60 bug 4k-u, '83 KE70 SR Coupe 3tgte, '84 KE74, '84 YN57, '84 AE85.6, '86 AE82 FXGT 20v, '91 ST185, '92 SW20
Have to say that niteparts bellhousings are the jazzy fizzle... definately worth the extra coin I believe, got mine a little while ago and It has been no problems at all.
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
Guys I emailed A1 turbos to get a freight price for a niteparts bellhousing and asked if they'd do a group buy and how much, i'll post up when I get a reply and see if anyone is interested, and if so i'll pm the board about a group buy approval. I am looking to buy one for myself group buy or no group buy, but of course a group buy gives everyone a chance to get a better price![]()
51LII - 1972 TA22 Celica | Morpheous Metallic | 4AGE 20v Silvertop | Razorback ECU | W58
Toyota Car Club (Qld)
yeah they are the best bellhousing to use, good luck with the group buy, pity I already have one....lol
Confirm the amount you require before he places an order as mine took 3 months+ to arrive.
But definately worth the wait! Good luck!
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
Guys got a reply:
group by would be at least 5 or more we could do them for 650 each and the freight would be a bit cheaper not sure how much .They are on backorder till next week
If anyone is interested let me know so I can contact the board about a group buy, if not i'll probably just order myself one if I dont hear back. And i'd rather see if anyone is interested before I ask the board for a group buy first, as I know theyre busy and dont want to waste their time![]()
51LII - 1972 TA22 Celica | Morpheous Metallic | 4AGE 20v Silvertop | Razorback ECU | W58
Toyota Car Club (Qld)
good luck hearing back from the board for group buy permision, i tried 3 times with no response for a different group buy...
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
ok, so i guess no one is interested..... i'll be buying myself a bellhousing shortly....
51LII - 1972 TA22 Celica | Morpheous Metallic | 4AGE 20v Silvertop | Razorback ECU | W58
Toyota Car Club (Qld)
Starting to panic that im not going to get my niteparts bellhousing in time for getting my car back, as im hoping to have it ready for Toyfest. I dont suppose anyone has one theyre not currently using that I coudl use to get my engine mounts sorted when I get my car back? It will have to be a niteparts one so that my mounts end up int eh right position, and I will get it back to you quickly, or could give you mine when it arrives.
Bit of a long shot but if someone could help out a toymodder would be VERY much appreciated!
51LII - 1972 TA22 Celica | Morpheous Metallic | 4AGE 20v Silvertop | Razorback ECU | W58
Toyota Car Club (Qld)
Hey guys got a mate going to look at a dellow w series to 4a bellhousing sometime this week are they still a piece of shit or have the gotten better?
I cant seem to get onto the niteparts website either?
Z20- SOLD
found a link through the a1 turbos website....so thats where i should buy it through?
Z20- SOLD
Yeah if you found the link then thats where you order it online... or you could just email Damian the contact there to confirm..
51LII - 1972 TA22 Celica | Morpheous Metallic | 4AGE 20v Silvertop | Razorback ECU | W58
Toyota Car Club (Qld)
Yay I got my niteparts bellhousing! Only downside is they havent drilled any slave cylinder bolt holes, im assuming so people can use different slaves. What have you guys wtih these bellhousings been using? I was hoping to use a 1G/W58 series slave, I remember there were both LH and RH versions of them? Im sure I came across that when ordering my slave last time, the one I needed was the passenger side one, but the first one my supplier ordered was for the drivers side. So hopefully I can just order the drivers side one and use it.![]()
51LII - 1972 TA22 Celica | Morpheous Metallic | 4AGE 20v Silvertop | Razorback ECU | W58
Toyota Car Club (Qld)
Think you`ll need one to suit the displacement volume of the master you`ll be using
I assumed the 1G/W58 ones work, I havent actually selected my slave as of yet, so I cant give any form of positive input...lol Apparently T50 ones work aswell from what I have heard.....
1967 RT40 Corona Current Project - http://www.toymods.net/forums/showthread.php?t=46182
Bookmarks