Results 1 to 3 of 3

Thread: Interchange for 42431-22060, Rear brake rotor

  1. #1
    Junior Member Backyard Mechanic 3sgte's Avatar
    Join Date
    Jan 2006
    Location
    Canada
    Posts
    489

    Default Interchange for 42431-22060, Rear brake rotor

    Hello

    I am looking for an interchange p/n either Toyota or aftermarket for 42431-22060.

    According to Toyodiy, it fits:
    Japan 09/1981-03/1988 TOYOTA CARINA FR TA6*,AA6*,SA60,RA63,KA67,CA6*
    Japan 07/1981-11/1985 TOYOTA CELICA AA63,TA6*,SA60,RA63,GA61,MA6*
    Japan 01/1982-03/1998 TOYOTA CORONA TT14*,AT14*,ST140,RT141,YT140,CT14*,KT147
    Japan 09/1980-06/1984 TOYOTA MARK 2 GX6*,LX6*,MX6*,RX6*,SX60,TX6*
    Japan 09/1980-06/1984 TOYOTA CHASER GX6*,LX6*,MX61,RX6*,SX60,TX60
    Japan 03/1980-06/1984 TOYOTA CRESTA GX5*,61,LX60,MX51,61,SX60,TX50
    Japan 02/1981-11/1985 TOYOTA SOARER GZ10,MZ1*

    Does anyone have a good interchange catalog/site that they can direct me to?
    I have struck out miserably on google for this...

    I would also be fine if it was a 5 bolt that I needed to redrill...

  2. #2
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: Interchange for 42431-22060, Rear brake rotor

    MA61 and RT142 are about the only Aus delivered cars on that list.
    And you should be able to get them aftermarket DBA or RDA (haven't looked personally).

    4x114.3
    60.1mm centre bore
    266mm OD
    18mm thick

    According to Brembo the factory part number is 42431-14070 though.
    Which is where I've got all these details off.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

  3. #3
    Junior Member Backyard Mechanic 3sgte's Avatar
    Join Date
    Jan 2006
    Location
    Canada
    Posts
    489

    Default Re: Interchange for 42431-22060, Rear brake rotor

    Thanks for that!

    I can get 42431-14070 and aftermarket equivalents here, I just didn't know if they would fit, as there is nothing that cross-references the two part numbers.

    I will be pulling the brakes apart later this week to measure the existing rotors.

Similar Threads

  1. Can somebody measure up an ST184 front brake rotor for me?
    By Howieau in forum Tech and Conversions
    Replies: 4
    Last Post: 26-07-2009, 06:59 PM
  2. 324mm x 22mm rear brake rotor to suit mk4 supra
    By Disturbed1 in forum Tech and Conversions
    Replies: 9
    Last Post: 11-07-2009, 12:43 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •