need help to find a crush washer.

[blakeg]

ok everybody.. i have kinda hit a wall , i need two washers with an ID of 18mm and external di 39mm
and thickness of 0.5 mm

its for the large banjo oil feed bolt on the gen 2 3sgte, toyo cant get me the pair for at least 4 weeks and i need it yesterday.

can anyone help me with ideas.

[Hiro]

What kind of washer? Metal? Rubber? Flat/cone/spring?

[blakeg]

metal, with some kind of thin black coating on it .

[blakeg]

here is pic of old one

[indeecent]

Oil feed- I would guess he means the copper ones?

Any auto shop of decent quality should stock your generic ones - failing that, engine rebuilders/truck spares etc etc

[blakeg]

can i use a copper one in place ? i worry they will be too thick

[allencr]

Aluminum from a beer can/whatever for a quick&dirty that'll last as long as anything else.

[blakeg]

needs to last... cant get at it once manifold is on

[jonathan yee]

the gen3 ones i've gotten new don't have the black coating, brass would be fine.

[sc400]

try a hydraulic hose place there bound to have what your after or know where to get it