JZ bellhousing measurements needed.

[Disturbed1]

Hello,

chasing the shortest/stumpiest bellhousing available that will bolt up to a 1jz engine.

if anyone has any of the following lying around - could you please measure the overall 'height' from flange to flange and report back please.

combos i see possible are

1jz auto
2jz auto
1jz r154
2jz w58

cheers

[midnight_purple_GA70]

can probably do all but 1jz auto... but not til the 18th as im not home

[amichie]

Hello,

chasing the shortest/stumpiest bellhousing available that will bolt up to a 1jz engine.

if anyone has any of the following lying around - could you please measure the overall 'height' from flange to flange and report back please.

combos i see possible are

1jz auto
2jz auto
1jz r154
2jz w58

cheers

I know the 2jz auto is about 20mm shorter than a 1jz auto as I had both side by side recently.

[Disturbed1]

have read a post by peewee that a J1 housing is 122mm no idea what car that correlates to...

eitherway, should probably add to this thread that ill be needing the smallest of the bunch so if anyoen has one for sale - let me know

[midnight_purple_GA70]

j2 i believe is the jza80 auto...

or maybe j3

i dunno will have to check when im at home... i have one in the shed

[madmont]

I have a JZA80 NA auto with a 122mm J1 bell housing