Can you get the carbon clutch plates for them?
Just added the edition of the Supra 2JZGTE twinplate clutch.
Most reliable clutches I have dealt with!
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Can you get the carbon clutch plates for them?
Lily Simpson 6.7.2010
R.I.P.
The carbon clutches are totally different. So you cant put the carbon disc into their normal housings.
But we can get the carbon clutches. Although they are not cheap...
Let me know what its for and I can price it up.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
??? Should be able to simply use a carbo clutch plate? They may need a different material wear plate (?), but Tilton do them and this was an option for my 7.25 inch clutch with the same cover? Only reason i didn't go for it was the extra cost at the time.
BTW it's for a TT 1UZ running a tremec TKO600 box
Lily Simpson 6.7.2010
R.I.P.
Ok I will ask QM, they might offer this as they custom make me Organic discs.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
ta mate. The QM covers are so similar to the ilton stuff i wouldn't be surprised if Tilton make them for them under licence? Or whoever makes the Tilton stuff makes the QM stuff as well.
Lily Simpson 6.7.2010
R.I.P.
haha the designs are different.
We have been using Tilton, PTT, AP and QM for years and you can see the differences.
Also are you after the thick plates 0.250"?
Or the thin 0.100" thick ones?
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
I use the thicker 'rally' plates, i assume they are the 0.250" ones?
Lily Simpson 6.7.2010
R.I.P.
hi
can you do a twin plate/flywheel for a tremec t56 magnum to 2jzgte
Last edited by blkjzs; 19-01-2012 at 10:16 PM.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
There has been alot of interest for these.
Remember we can custom make kits to suit most applications!
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Bumping this up. Had great response.
Any custom setups you require just give us a PM or email.
We will also be adding in the 5.5" twinplate setup. The clutch weighs 2.5kg!!!
Great for the N/A looking for something Ultra light.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Here's a challenge. A daily driver suitable clutch for a 1UZ that will handle 1000Nm of torque? yes serious query, don't want to go auto
Last edited by JustenGT8; 19-05-2012 at 09:43 AM.
Lily Simpson 6.7.2010
R.I.P.
Bookmarks