Soarer Z10 swap to JZ?

**Bora** · 10-08-2011, 08:43 AM

Hm, after calculation ideas in mind, maybe 1UZFE will be better for me (it costs much less in UA)?
What problems with swap i can get with this idea?

**CrUZida** · 10-08-2011, 09:55 AM

http://www.toymods.org.au/forums/eng...z10-guide.html

**Bora** · 10-12-2013, 12:33 PM

Ahoy! Suddenly, three years later, I found a good, stable paid work. And she waited!
Very, very (you remember the potatoes in the luggage?) lot of work on the body.
Soon, a million questions about the engine and suspension, of course studying your links. Just look at this ...

**marvis** · 10-12-2013, 09:51 PM

Good work!

**Bora** · 26-01-2014, 08:11 AM

Finally! After several years of searching - I bought 1UZ-FE from the LS400!
About 1.500 USD. Believe me, it was difficult to find a motor in Ukraine in good condition and in the kit... And also bought W57 gearbox.

**Bora** · 27-02-2015, 12:18 PM

After an incredible amount of time, the crisis in our country - crazy like me working two jobs building the car.
Latest news - finally bought Mishimoto radiator (thx to honda)
Shipping from Japan about three months - blinkers, side lights, bars Cusco. And tank summitracing

Finally establish motor with gearbox, clutch being finished (huge problem to find a set of 3SGTE)
Bought brakes - again the budget, 4 piston Brembo from BMW
Little visual understanding

Friends, please help me figure out what to do with the suspension. Many topics, but the old ones without pictures and relevant information.

**masterofsinanju** · 27-02-2015, 09:14 PM

As was said before, custom or weld on coilover kits look like your only option.

I'm not sure what other toyota model compatibility is like with the z10, but if you take some measurements the guys at techno toy tuning might be able to help.

**Bora** · 28-02-2015, 11:27 AM

Originally Posted by masterofsinanju

As was said before, custom or weld on coilover kits look like your only option.

I'm not sure what other toyota model compatibility is like with the z10, but if you take some measurements the guys at techno toy tuning might be able to help.

I met people (even here, if I'm not mistaken) that set the coil from S13 with little rework. Is this true?
It is also very acute due to UZ question - blocking LSD system.

The main problem bro, I'm in about 14,000 kilometers away from you.
No information, examples of the building a car like this in our country. Especially JDM
In Russia, everything is easier - Japan is almost near.

**patrickleslie** · 06-03-2015, 12:12 AM

Originally Posted by Bora

I met people (even here, if I'm not mistaken) that set the coil from S13 with little rework. Is this true?

True, but I would not do this! It is more trouble than it's worth, unless you are already familiar with the S13 setup.

BC Racing and Megan do a coilover kit to suit MX73 that will fit MA61. In theory it would fit MZ10 in the same way. Check this write up out: http://www.toymods.org.au/forums/thr...ers-into-MA61/