Engineers Certificates NSW - Link to list of engineers from RTA *add your recommendat

[TheStitt]

Has anyone got contact details for this guy?

Rod, when you say on the review board, what do you mean by that? is he under investigation?

Yeah I gave him a ring, just got his details from the rta web site. Seemed alright but as said above had a lot of work on

[ProjectSleeper]

Roger Perkins
0412 414 722
(02) 9679-1621

Roger (or Pappa Smurf / Santa - when you meet him you know why it he called that)

Hard to get hold of - Always busy - does LOTS of work with large trucks etc - so he only does cars when he has some spare time etc...

As I said, absolutley top bloke, went out of his way for me and I can not thank him enough..

[Dom-AE71]

I used a guy called Peter Gillard

my car walked thru his inspection on sat

Having said that many questions wqhere asked before he saw the car, and my whole drive line and chassis is better than new. I think that helped.

Very helpful and was help and good with time to get me to the nationals

i must be retarted but i cant find the site with the detials on RTA listed engineers? searching comes up with SFA

wats the contact detaisl for the guy you used stitt?

cheers

[TheToyman75]

Has anyone got contact details for this guy?

Rod, when you say on the review board, what do you mean by that? is he under investigation?

nah mate not under investigation. He is on the board that is recommending the new guidelines and requirements fo rthe Dotars proposal

[Baref00t]

I see this thread wound up over a year ago, and was wondering if anyone had any updates? I'm hoping to chat to someone prior to doing too much work... Is John V still everyone's top pick?

[infotechplus]

I see this thread wound up over a year ago, and was wondering if anyone had any updates? I'm hoping to chat to someone prior to doing too much work... Is John V still everyone's top pick?

I used John for the 1GGZE/Hilux conversion. Recommended. Cost $500.

Two points of advice, if I may:

1. Make your conversion as neat and tidy as you can, don't cut corners and if YOU think it might be dodgy, then it will be.

2. I made a folder up of all my mods, wherein I described what I did, and supported with photographs. John really appreciated that.

Cheers,

Peter

[MAD79R]

i also used John Varetimidis without any worries or hassles

[Baref00t]

He must love this forum!!

[STR8 2.8]

yep i used john for my certifcate also. i would highly recommend him, very professional and great to deal with

[TA-022]

again ive run my project past John V before gettng into the nitty gritty.

As Infotech did i had a printed walk through on all parts and all machine work involved ie welding this bracket using these brakes ... he loved it.

He didnt deny anything i was doing (like all else CHP 1G rnp KE70) but did suggest improvements like use right angle instead of flat steel to reinforce things.

Havent been for engineering yet (not finished) but John is all to keen to talk things out and
has always told me to call him if I have queries (ive met him once )

Top Bloke.

[psychofox]

I thought I'd drage this one up to the top..

I'm just about the start the process of taking a stock AW11 and installing a CAMS compliant ROPS (roll cage), 4AGE-20V, bigger brakes and suspension mods. My hope is that I can do all this and still be able to be road legal.

Does anyone have any experience with any Engineering Signatories in the Illawarra? I would prefer not to have to go up to Sydney to get it engineered.

[Mr Ed]

Anyone know what happened to Lakes Edge Engineering? They did the report for a 1UZ ute I bought, and have since sold to a mate who needs to get a blue slip for it, but neither of us even had the report, and we have not been able to find one or get ahold of anyone from Lakes Edge.

RTA notes the report number on the rego cert but say they dont have a copy.

Any help would be much appreciated