1jz accessory belt?

[gmonkey]

Hey all, me again....


Another question with my conversion. Ive ditched powersteering and aircon and getting a 2jzgte water pump on my 1jzgte, now wondering how or where i could find a belt to fit this due to its a lot smaller now? Also planning on doing one of those pulley kits if that matters..

cheers again

[CHB]

you really should get the pulley kit, put them up and measure the exact belt length by using a piece of rope. once you know the length just bring your original belt to shop and ask if they have the shorter version which quit you needs.

[midnight_purple_GA70]

i read somewhere something about needing to switch to a commodore tensioner pulley as the belt will end up running ribbed side to the pulley in that combination

[td42gq]

I run the spring loaded standard tensioner on mine, I removed the smooth pulley and used a ribbed pulley off a Gen 3 commodore motor idler pulley, It bolts straight on.
The belt I used is a standard pk belt off the shelf 1080mm I think, can't really remember at the moment and car is covered up at the moment, if you really need the size I can check it tommorow if you require.

I hope this helps
Aaron

[ecko]

^^^ what he said

[gmonkey]

I run the spring loaded standard tensioner on mine, I removed the smooth pulley and used a ribbed pulley off a Gen 3 commodore motor idler pulley, It bolts straight on.
The belt I used is a standard pk belt off the shelf 1080mm I think, can't really remember at the moment and car is covered up at the moment, if you really need the size I can check it tommorow if you require.

I hope this helps
Aaron

im confused :S got a picture before you covered it up mate?? where you running powersteering and aircon?

[td42gq]

Gmonkey,

Ok what I have is like this



no a/c or power steering and the pulley at the top right of the picture which is on the factory tensioner was smooth but is now a ribbed pulley off a gen 3 v8 commodore drive belt setup

I hope this makes it a bit clearer
Aaron.

[gmonkey]

yep thats exactly what i want to do!!