4AGE injector?

[parrot]

Picked up some Denso injectors out of a blue top 4AGE fitted AE82 at pick & payless (paid nothing actually) on the weekend. Was getting a few odd things then noticed these injectors. They are a dark reddish/brown colour, low impedence top feed and fit the standard loom plug (C type plug). Part number 23250-16090. Definitely not 3SGE as low impedence. Anyone know what they are out of (EPC people) and in particular flow rate? I have searched extensively on injectors previously and this part and colour isn't on any of my lists.

[ToranaJudd]

Had a look on Lextreme and came across this. May help for you to identify them.

Just a Thought
Here is the link-

http://www.lextreme.com/Injector%20data.htm

they sound 4AG-ZE to me...

OHM CC/min kg/cm^2 valve hole Engine
reddish-orange 2.9 365 2.55 ball (2) 4A-GZE

or even 3VZ-FE

Cheers, ToranaJudd

[ToranaJudd]

Sorry, cant be 3VZ-FE.

Wrong connector type!!



Cheers, ToranaJudd

[parrot]

They are a real deep scarlet colour, single hole. Don't seem to fit on any of the databases, but there are a lot of gaps on them.

[ToranaJudd]

Look at the link i just posted. Which connector type is it like?

E ?

C ?

F ?

D ?

Cheers, ToranaJudd

[parrot]

C type. I reckon its an EPC job to suss out what engine they are from.

[ToranaJudd]

Dam, Nothing with the C type matches your colour. Sorry i couldn't be of any more help, ill keep and eye out on other sites for you and let you know if i find something.

Goodluck with your search

Cheers, ToranaJudd

P.S. Whats EPC ?

[kingmick]

as you will want to get them cleaned! flow them and you will know!

[parrot]

I'm putting in some 225cc series 1 1GGTE injectors I have already had cleaned, out of interest. Not going to get these done too unless I can base it on something firm as a worthwhile experiment.

[kingmick]

cleaning and flowing is cheap! then you could sell them if there not a size you want. just a thought

[parrot]

Ha! You obviously have too much money on your hands! $25 - 30 each aint cheap, although I could do one as an exercise I suppose. Would still be good to know what engine they come from to make a rough guesstimate

[30psi 4agte]

Can you put up a pic

[parrot]

Injector on the left is a brown 3SGE for colour comparison.

[takai]

I would hazard a guess that they are the same injectors. I have seen GZE, GE and other injectors come out in a fairly wide range of shades. A plastics and composites person at uni once explained that the dying colour can change by several shades in the presence of oil and heat etc. So it is possibly that.

[timgte]

Hey!
Funny you should mention this, quite a coincidence actually, but i have just installed a new 4age into my ae82 (blue top) and it also has these colour injectors. My old one had the beige colour ones.Maybe toyota brought out the blue tops with different injectors in some of the models.