How to make an ECU Patch Loom?

[jonathan yee]

Fyi terra-this is a messy patch loom. My first attempt, had crappy iron and I didnt try to neaten it up at all. For a 3sgte and microtech.

[timbosaurus]

What Terra has done above is what I normally do.

I can see where you're coming from JP, but I usually just backfill around the joints with a 2-pack epoxy like araldite to make everything as tough as nails.

Roundy, if you need the 26-16-12-22 connectors, I can get them for you at around half the motec price. And also the mating loom connectors/terminals if you needed them for any reason.

[JP]

where the terminal method really comes in handy is with the 3 or 4 row sockets (JZ's, ST215, ZZE123, DBW toyota's etc). It's really difficult to get an iron down between the array of pins to solder a wire directly, with the terminal method it's easy.