inhibitor switch

[S.W.A.M.I.]

I have an ae101 thats been converted to manual.

i would like to find out which wires need to be bridged or cut, in order for the car to start?

Thanks in advance

[crownv8]

There will be a four pin plug either near the gear shift under the console or near the shifter point on the auto box.

There are two wires for reverse lights. Will be different colours. There will be two other wires of the same colour. These will be to the starter motor. Bridging these will give you power to the starter. These are usually black with white or blue trace on them. It may even be setup with a few plugs so the start wires can simply be plugged into each other for the starter to work.

[S.W.A.M.I.]

thanks alot
got the car started this morning