MA70 ABS ecu and loom in A70 Manual

[JZA70R_92]

Hello guys

I'm running a 1JZGTE and JZA70 engine bay and engine looms in my MA70 now Ive got all the components for the ABS still in the car so want to run that also have the correct r154 sensor question is there is a few wires that come out of the MA70 abs computer that I don't know what to do with for eg the ECT WIRE and the NL and PL see the diagram attached. The sensor Ive got is a Factory JZA70 sensor 3 Wire. the ABS Computer is MA70 and ive dissected the loom from the MA70 main body loom.

[Z2TT]

Hi,

Let's have a look at some diagrams :





As we can see in the section circled red in both diagrams, one of the diagrams shows PL and NL Come from the A/T Indicator switch to tell the ABS Computer when your in Park and Neutral.

NL - Neutral
PL - Park

the wire labelled "ECT" seems to come from the sensor and is only used in Automatic models.

Since you have a manual you probably would leave these wires out.

[JZA70R_92]

cool boris cheers for that. now another question where do i obtain the abs signal for dash as on combination plug i cannot find a L-O wire.....