turbo upgrade for 1j

[slipway_cresta]

hey guys im sure this topic has probably been covered. I'm running a jzx90 1jz in my jzx81 mark 2. keen on a turbo upgrade from the twins but the catch is this i use the car as a track car mainly for drifting and i'm not wanting something that is huge and unusable under 5000rpm. It needs to be responsive as i'm not after huge power 250-270ish kw at the wheels.

what u reckon trust tdo6 20g
hks gt2835r
kkk 27

im so unsure what to run anybody running a similar set up?

its for this

[Dieseltrain]

Definately go a 3076r or 3037 with a 0.6 rear housing champ . Great turbo on a 1jz for Drifting and trackwork and crazy response . will make you 250-260rwkw , if you want more power, you will just need to go the 0.8 rear housing which will be responsive as well and make up to 290-300rwkw @ 22-25psi with the right mods .

[Pimpin_1JZ]

Damn dude that JZX81 is fucking porn!

3037 Would be a sweet turbo.

[1JZ-Rolla]

Nice car.

I can vouch for the 3076, even with 0.82 exhaust housing it is very responsive, plenty of torque from 3500rpm, and just pulls harder from there.

Cheers

[mattysshop]

just make sure you use a proper manifold.. i agree with the above mentioned turbos

[Endless]

2835R will be best choice from what you have listed.

[matlennon]

+1 on 3036 with 0.82 exhaust housing

[JZA70R_92]

3076, even with 0.82 exhaust housing

got this on my 1J and it shits all over the stock twins makes good boost and able to spin tyres very easily!

[rshuwy]

you could always get steel wheeled stock turbos and twin dumps, you'll make the power you want with very little lag.

[1JZ-Rolla]

Where do you get these steel wheeled twin turbos?

[rshuwy]

go find them ya self ya smart arse.

[1JZ-Rolla]

No seriously! I know people were buying them like hot cakes a few years ago, but i've not seen them lately, but am interested!

Cheers
Phil

[mr1jz]

Where do you get these steel wheeled twin turbos?

GCG do them and they are quite expensive from memory.

I would go a 3076 for good response and power on a 1JZ

[rshuwy]

oh sorry, i thought you were trying to slight me.

im not sure, i think there was a dude importing them from china, the quality was questionable tho. i meant getting them rebuilt with steel wheels. probably abit expensive, but i guess it would be comparable to buying a new turbo and manifold tho.

[slipway_cresta]

awesome thanks for you input guys think i might give the hks gt3076 a go, should make it a bit more fun