Surely with the photo they can look it up in the EPC? Call James at Castle Hill Toyota and tell him you want to email a pic. He's very helpful. If I had to guess I'd say Input Shaft cover?
this shaft is broken and i need a new one. What do you call this part? and good old toyota wont help me unless i have a vin number and all that shit. anything from a jza70/jza80 etc basically anything that came with a factory R154. any help would be appreciated.
RA23 1JZ VVTi 373hp - SOLD
12.4 @ 110mph
THE EVOROLLA262.9hp - SOLD
JZ parts facebook page - https://www.facebook.com/groups/524841910926804/
Surely with the photo they can look it up in the EPC? Call James at Castle Hill Toyota and tell him you want to email a pic. He's very helpful. If I had to guess I'd say Input Shaft cover?
Project megap00 - Gave up and sold up. Money tree died
Hey man,
JZA80 never came with R154's only the MA70/JZA70 turboes did. (and some other non supra cars).
http://www.toyodiy.com/parts/p_J_199...LMQZ_3302.html
Would seem to be this bit 33131-35031.
Called Retainer, Bearing, Front.
1977 RA35 Celica GT - I4 | 2007 GSV40R Aurion - V6
Don't live life being scared of death, live in the fear of not truly living. RP 2012
How did you manage that?
bought it as is, from a man named "shifty". it came from japan and it was on a crate so i can only imagine a dodgy forklift driver hit it some how.
RA23 1JZ VVTi 373hp - SOLD
12.4 @ 110mph
THE EVOROLLA262.9hp - SOLD
JZ parts facebook page - https://www.facebook.com/groups/524841910926804/
that bearing retainer is also found on local Toyotas such as Hilux v6 and Prado with R150/1 gearboxes
Jealousy is a curse
No doubt its also found on local Toyotas such as the MA70/71 turbo Supra...
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
ok thanks guys. Will ring castle hill toyota. On another note i just got a chance to dummy fit my motor tonight and the shifter goes past the original shifter hole, can anyone tell me if you can convert a remote type shifter R154 to the non remote shifter type? would i need to change the rear housing? or just the top part?
RA23 1JZ VVTi 373hp - SOLD
12.4 @ 110mph
THE EVOROLLA262.9hp - SOLD
JZ parts facebook page - https://www.facebook.com/groups/524841910926804/
You should be able to have that welded back in if its too expensive.
Yeah, you can convert them, but I don't think its as easy as unbolting and rebolting.
Depends what car yours came from, all the remote shifters have different bolt patterns where it bolt to the box (rear housing).
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
jzx90 i think
i was thinking that too but if i welded the collar back on then the welds might not allow the throwout carrier to sit as far back as it originally did, and if i grind back the welds it would not be as strong as it originally was. Or do i worry too much?
RA23 1JZ VVTi 373hp - SOLD
12.4 @ 110mph
THE EVOROLLA262.9hp - SOLD
JZ parts facebook page - https://www.facebook.com/groups/524841910926804/
Bookmarks