Heavy Duty Engine mounts - Where to buy?

[DiZ]

I am having trouble tracking down some new heavy duty engine mounts for my 4AGZE, now the mounts I want to replace are the same as the 4AGE mounts.

The front timing case mount and the mount at the very end of the gearbox.

I had tried to get them through noltec but they only make the front gearbox mount. I do however have a spare end gearbox mount I am taking there to see if any other inserts that make fit the bill but I am highly doubtful. If they find an insert to fit the end box mount , would the end box mount and the front timing case mount take the same insert or do I need to find a front mount to take and get another insert matched?

Where do you people get your heavy duty 4AG engine mounts?

[terra]

can you just fill your old ones with urethane and let them set? =)

[FATMR2]

I had the same problem. All i did was take my mounts to noltec and they made urethane ones for me.
There was no chance in hell they would ever break either. I did notice a little more vibration with them but not enough to bother about.


Im not sure what exactly you are asking them for but i gave them the whole mount.All four as a matter of fact. They pulled the inserts out, put a new bit of metal through the centre and filled around it with urethane.

I thought they would have been able to help you...........interesting....?!

[KLR16V]

FATMR2 SAID

"They pulled the inserts out, put a new bit of metal through the centre and filled around it with urethane."






how much does this cost for 4 mounts??

[30psi 4agte]

yep go custom youll never look back!!!

[takai]

Only problem is that Noltec no longer do custom afaik (from: http://www.toymods.net/forums/showth...=noltec+custom)

Specifically this post (http://www.toymods.net/forums/showpo...84&postcount=9) by Toobs

[Wezelton]

Any idea if they would make a custom sized set of engine mounts ? Im putting a RB20DET into my RA60 celica (it works out better than a 1GGTE) but i may need a custom sized mount. Anthony Callum has made up the engine mounts for the RA60/65 celica to fit the 1GGTE, but i dont have contact with him so im unsure how he made them. Any ideas ? Sorry to hijack the thread but i feel its sort of part of your question, only a little further lol

wes.

[Billzilla]

Just fill the gaps in the standard mounts with the hard version of Sikaflex. You won't break them after doing that.