Cartridge hub bearings mid 90's Corollas

[Ben Wilson]

Looking at building a single seater and I've found a useful looking wheel bearing on the web.



According to the website I found the listing on it's fitted to the following Corollas in the US:

1993: All Trac; 4Cyl 1.8L;
1993: Base; 4Cyl 1.8L;
1993: Base; 4Cyl 1.6L;
1993: DX; 4Cyl 1.6L;
1993: DX; 4Cyl 1.8L;
1993: LE; 4Cyl 1.8L;

Has anyone seen something similar on an Australian delivered car?

[LeeRoy]

My AE93 was slightly similar.
http://www.toyodiy.com/parts/p_J_199...EMVF_4303.html

The bearing runs a split (two piece) inner race, with a solid outer race and a double row of ball bearings.

Sorta like this....
_______
O \/ O
\ /
/ \
O /\ O
-------------

[Ben Wilson]

Thanks, but the bearing itself isn't the issue, what I'm looking for the bolt in unit. Life would be a lot easier if we could just laser cut a hub and bolt the bearing cartridge into it.

That link is great, it looks like Toyota never used that sort of setup in Aus. Might have to look at importing some...