TA22 T50 Speedo Drive Part Number

[brucey]

Does any know the part number for a TA22 T50 speedo drive?

The local Toyota parts dealer can't get older cars to show up in their computers, based on year and model.

Perhaps if I have a part number they can put into their computer they can see if it's available and order it in.

[old_school_jap1]

Going from my _A2_ Celica chassis group EPC it is 33403-19075

[kickstartRA28]

do you need one??

[brucey]

Going from my _A2_ Celica chassis group EPC it is 33403-19075

OK, thanks for that. Did a google search with that part number and it comes up, but it said not available:

http://www.toyotapartszone.com/1977/...-gear-mtm.html

I'll give it a try at the toyota parts store.

[brucey]

do you need one??

I got a T50 gearbox without the speedo drive, so I'm looking for one. Did you have one spare from a TA22?

[kickstartRA28]

I will check when I get home.

[brucey]

Went to Toyota parts and they put the number into the computer. It comes up, but its not available, stopped making them.

What other options would I have? Would an after market auto parts company make it?
I guess its a wearable part, the gear is plastic and wears down.

[kickstartRA28]

Cant find it anywhere sorry...

[puzzle man]

It took me ages to find a speed sensor drive from a T50 for the T50 I got for my 4AGE,
I ended up getting one from a T40 out of a ke70 hope this info helps.

[brucey]

I tried a speedo drive from a K40 gearbox (KE30). It fits into the T50 good, but the plastic gear does not mesh well with the worm gear.

[kickstartRA28]

This must be what youre looking for

[brucey]

This must be what youre looking for

I tried that part number at Toyota parts, but it shows up in their computer as discontinued. Could be under another part number?

[brucey]

I tried a speedo drive from a k50 ke70 gearbox and it fits into the T50. It turns when the output shaft turns. The other speedo driven gear from the k40 gearbox I tried must of been too worn down with chips (speedo did flicker a bit), .
The KE70 drive gear has 20 teeth (6x20) and the K30 drive gear has 19 teeth (5x19). I reckon I'll get a 19 tooth one due to the diff ratio in my ke30 and lower profile tyres.
The part number for the 19 tooth gear is 33403-19135 ($56.00)
Have to order it in.

[kickstartRA28]

I tried that part number at Toyota parts, but it shows up in their computer as discontinued. Could be under another part number?

PH Gordon on 0421 240 450 he is suppose to have new ones available.