Is it possable to buy crimp connectors to suit loom plugs?

[Munki]

Hi everyone

I'm looking to rewire my 4agze and i was wondering if it is possible to buy the pins/rubber seals to suit the plugs ready to crimp? They are a female style pin and most of the engine loom plugs use the same types. I will grab a picture shortly.

If anyone could point me in the right direction that would be awesome. Im sure a source of these pins would be handy for all toymodders.

cheers

Daniel.

[wilbo666]

Yeah you can get them but the Minimum Order Quantities (MOQs) are usually a bitch tho!

Try getting touch with Anthony from Kaizen Garage as he has them and should be able to help you out

Kaizen Garage
2/1856 Sandgate Road,
Virginia QLD 4014
Australia
0415 185 815
Contact: Anthony or email

Cheers
Wilbo

[RA35GT]

Yes it is.








Minimum quanities are a PITA.

I took mine to a Tyco/AMP reseller in Perth and the matched them for me.

[Munki]

cheers guys will look into them.

whats the min order? 100? 1000?

[Draven]

my brother works in the industry... if you only need a few, I could arrange postage to you?

but yes, otherwise it gets really expensive really quickly.

Especially if you include the cost of a good crimping tool (his cost over $400 )

[RA35GT]

for one of the crimps i got the minimum order was 200...not so bad.

the other crimp had a minimum order of 1000 though.

It depends on the popularity of the terminal.

[TERRA Operative]

Toymods! Group buy???

[RA35GT]

Just went back and checked.

The first three photos in my post above was used in the ecu connector (18RGEU) (Had a MOQ of 1000)

The last three was used in the injectors, afm, temp sensor, cold start injector and time switch, (Had a MOQ of 200)

The terminal was also the same in a 5M-E temp sensor, injectors etc.

I'd imagine it would be used in a number of engines of that era. (70's-80's)

Probably a good idea to get people to check and start a database or something.

[CrUZida]

How much each were the pins?

[RA35GT]

The top one was 0.22 ea.

The bottom one was 0.16 ea

[CrUZida]

Try this site for later model stuff.
Bit more expensive, but no MOQ's
http://www.phoenixtuning.com/zenstor...ndex&cPath=867

[Munki]

Ok I used the images on the website posted by Cruzida and fired off to two known suppliers of the plugs. Now its a matter of seeing if/when they reply.

I dont mind organising a group buy if the MOQ is excessive, but probably best to use a different forum as toymods seems quite difficult to authorise this type of thing.

Daniel.

[JP]

you can get the terminals for basically all the toyota loom plugs in small quantities from here:
http://www.bmotorsports.com/shop/index.php/cPath/109?

[Munki]

I ended up buying a whole bunch of things from bm motorsports cheers for the help everyone.