ae92 gauge cluster

**stiks666** · 29-10-2007, 08:31 PM

Is a ae92 tacho cluster plug and play, with a non tacho cluster?

**TERRA Operative** · 29-10-2007, 08:38 PM

As long as it's not an SX cluster I believe it is a direct swap over.
Best to Google for pinouts to make sure.

**stiks666** · 29-10-2007, 08:39 PM

thanks for that, will do

**stiks666** · 29-10-2007, 08:41 PM

sorry one more thing, is there a difference between the nova and the rolla clusters?

**TERRA Operative** · 29-10-2007, 11:04 PM

Wouldn't have a clue. I suspect that their mounting, size and electronics would be the same, with the only major difference being cosmetic.

**Bugzbarney** · 29-10-2007, 11:41 PM

My recommendation: Go for the SX cluster...much nicer cluster imo. Should you choose this i can provide all the pinouts and guides on how to do it. Basically if u do get a sx cluster... all u need to do is find a blue plug that will fit the extra plug on the cluster (can be found on cars other than sx rollas).

Then u just need to lengthen some wires and plug em all in... which is all in the guide i have... should you go for the sx cluster.

Hope i made some sense
Bugz.

**Talasas** · 31-10-2007, 12:34 AM

You'll need the oil pressure sender too, the oil presure switch won't work.

**Bugzbarney** · 31-10-2007, 09:32 AM

Correct, i forgot that... Although i never connected the sender on mine as it was looking to be a pain in the ass... sender is very cheap to buy.

**Rustykaos** · 26-10-2009, 06:23 PM

Sorry to revive an old thread but I was wondering if you still have the pin layouts for this and a guide as I have a holden nova and have recently acquired an sx corolla dash cluster (I think) and would like to exchange them over.

Cheers Jarrod