Results 1 to 2 of 2

Thread: Mx62 cressida conversion

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Jan 2006
    Location
    tas
    Posts
    27

    Default Mx62 cressida conversion

    Im thinking about buy a mates car ive been borrowing, pretty cruisey car,
    But the power it has is pathetic, Being an m series engine will any other m series engine bolt into its place using factory mounts, also powersteering bracket and alternator will they bolt onto this a 7m as such.
    When converting to manual with these cars what clutch pedal/pedal box is a good fit, I know with mx73's you can use an ma61 pedal for instance,

    I suppose the mx62 is the ugliest brother of the cressida models but its starting to grow on me for sure and there doesnt seem to be many modded ones about the place

    cheers Josh

  2. #2
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: Mx62 cressida conversion

    Grab a whole 7M if that's the way you want to go. 5ME PS pump and alternator don't bolt up to 7M...

    5me engine mounts, sump and oil pump will on the 7M however


    GX61 pedal box would fit in, if you can find one Otherwise I modded xA6x to fit in mine...

    MX32 auto gearbox xmember is perfect W5x gearbox into MX62.

    W5x gearbox position I would recommend MA70.

    Cheers
    Wilbo
    Wilbo's Wiki (Includes 2JZ-GTE Wiring, etc! )

    Wilbo's JZA80
    Wilbo's JZZ12

Similar Threads

  1. 1j in cressida conversion.. what to look for?
    By rshuwy in forum Tech and Conversions
    Replies: 13
    Last Post: 03-08-2009, 04:27 PM
  2. MA70 --> JZA70 Conversion
    By Lambolica in forum Engine & Driveline Conversions
    Replies: 119
    Last Post: 09-09-2007, 08:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •