Motorkhana Saturday 12th September

[eeeyan]

Was it a "fully Sik Dorifto Discount"?? they are the best kind. I give drift discount or at least when ppl say ive got this car... i tend to look after em. Lotsa uses for aluminium.

Sprintex just placed a big order looks like i'm cutting 80mm plate up this arvo big heavy biatches those sheets of 80mm

[H1TMAN]

Got the new rear pads! Now I have to figure out how to put them on as I didnt take them off :S
I almost all set woooo!

[VA61DETT]

-eeeyan

Yes. the sikest
80mm: Whoo thats a big slab!
What sort of cutter you use for that stuff, water jet?

Soooo if I need a a bell housing size bit of 20-30mm, how much would I be looking at, (off-cut spec hopefully)...

-A

[eeeyan]

Nah just a bench saw water jet is at their end.

i got 3,4,5,6,8,10,12,16,20,25,32,40,50,65,80 & 100mm 5083 Marine Grade Plate on hand.
Solid Bar up to 4inch
All sorts of angle, Channel SHS, CHS, RHS
Tread Plate from 1.6mm up to 5mm (including a mirror finish version of 1.6mm propellor plate)
Flat Sheet 0.6mm up to 3mm on shelf

Off cut spec is easy just tell me size dude - drift discount is 8.00/kg down from $11.

I can cut plate into squares & rectangles for "billet" pieces which you can take to a cnc place
or extrusion to length unless its tiny stuff in which case by the length 6.5m

I reccommend Absolute CNc in Malaga, talk to Mark he can help you out.

[eeeyan]

for example a piece of 20mm at say 500 x 500 (should cover most bell housings i would think)

would run about $105 bucks Plus GSt and weight 13.3kg

[RA35GT]

Got the new rear pads! Now I have to figure out how to put them on as I didnt take them off :S
I almost all set woooo!

http://www.cygnusx1.net/Supra/Librar...ection=BR&P=20

TSRM FTW!

[VA61DETT]

-eeeyan

Freekn champ!
Will bail you up on Saturday for sure
New project in the works, VH45 Powered 260Z, in the not too distant future...

-A

[eeeyan]

Z's with V8's make me cream my pants dude. alwasy had a soft spot for 240Z's would love one with 2J how mad would that bastard be!

[RA35GT]

y0 eeeyan,

whereabouts is your shop?

I wouldn't mind getting some ally offcuts to practise welding on!

[eeeyan]

Malaga, 34 Boulder Road

[woggin]

so theres one spot you says stomps??

how many ppl are reserves??

I am one of them!!

[VA61DETT]

-eeyan

Yer the oldskool Z's are nice!
Have a look in last months ZOOM, #137, there is a lovely 1J 260Z
Well as the loopy V6 SW20

-A

[eeeyan]

Yeah the V6 is from the Aurion a 2GR
isnt it?

[eeeyan]

Off home in a min see you all tomorrow about 12

[Stomps]

fuck. all this chat.. i've lost track of who/what is going on..

Wog- tomorrow its first come first serve.. bring $75 and you are in.. unless someone gets in before you..

please nobody be late.. if you arent there, we start without you, no refund etc..

if you are running late or are just fucking useless and cant make it.. call me on

0420 309 266..

i will be the tired, stressed one as i wont get any sleep tonight.. so please try not to piss me off.. ta..

now.. back to the jibber jabber fools!

Stomps