Bulletproof 7MGTE (teh p00 motor)

[BlackSupra]

im not doubting the potential of the 1J, esp with a bolt on turbo guys are running 350rwkw.

But to have a streetable 400rwkw on a stock 1j would be hard to do, but with a few mods easily achieved.

Either way, both of the motors will have to be internally modded to make that power on a reliable basis.

EDIT: 7m = teh p00.

[TheStitt]

Sam thanks for pointing out the options but Whatthe isn't asking for them.

There are ppl out there that want to piss some 1 and 2J's off with high powered 7m's

[whatthe?]

Exactly. As I said in the first post it may be more cost effective to whack in a 2J and drop a mega turbo on it, but wheres the fun and what sort of pride of accomplishment would I get out of that? I've already done on engine convo pretty much single handed, looking for the next challenge now. It can take a long time and cost a lot, I don't mind that too much, the car running as it is will do me for whatever time it takes to build the new engine. It's not like it's a daily driver anyway, just my toy

[Norbie]

more cost effective to whack in a 2J and drop a mega turbo on it, but wheres the fun and what sort of pride of accomplishment would I get out of that?

Oh there's plenty, believe me.

[The Witzl]

you're not one to sit on that side of the fence Jeremy!
A certain tractor engine in my garage begs to prove otherwise

Teh 18RG weel nevah lo0SE!

[whatthe?]

Well, have started pulling the 7M apart and made my first purchase of new internals today. HKS forgies, 85.5mm

[BlackSupra]

OUCH!

what does a set of those set you back?

[whatthe?]

More than the 7M long motor that theyre going into did

[1200det]

They make you close to 3.1 Litre

[bbaacchhyy]

I saw those pistons on ebay not long ago.

Nice purchase. One thing to also remember is to make sure that your oil system is up to scratch.

Cheers

Michael B

[1200det]

Very true apart from the dreaded Headgasket issues when running a Higher HP 7M the oil system is something that needs to be taken care of or you will run into Rod knock issues in no time.

I saw those pistons on ebay not long ago.

Nice purchase. One thing to also remember is to make sure that your oil system is up to scratch.

Cheers

Michael B

[whatthe?]

Yes, those are the ones Michael. I emailed the guy after the auction finished without a sale and offered him $750 US + shipping for them. Bargain!

[whatthe?]

Found some cams, A set of TRD Gr.A 7M Supra cams
264ex 272in x 10.5mm lift. Anyone have an idea on what a good price for them is? They are in very good condition.

[1200det]

Well honestly the $794.99US the guy is asking is a bit steep for my pocket but then again there that hard to get these days he can ask what he likes i guess and he will get that asking price.

http://cgi.ebay.com/ebaymotors/TRD-G...17307870QQrdZ1

[whatthe?]

Mine now
Meh, theyre still cheaper than the HKS jobs I was contemplating