4ac valve clearances wanted

**Adsport** · 13-02-2009, 01:08 PM

as topic, valve lash clearance settings are required. im sure somebody out there knows them.

**crowncustom** · 13-02-2009, 05:21 PM

Valve clearances are Inlet:0.20mm Exhaust:0.30mm and are done while hot.
Hope this helps.
Cheers Brett.

**Adsport** · 13-02-2009, 06:02 PM

cheers, i just got a reply at the same time on 86dc also haha

thing is they seem very high

4ag: (cold)
Valve stem to guide clearance:
Inlet: 0.025-0.060mm. Limit: 0.08mm
Exhaust: 0.030-0.065. Limit: 0.10mm

**TERRA Operative** · 13-02-2009, 10:29 PM

I set my 4AGZE to 0.25 intake (two were at 0.23) and 0.30 exhaust.

Dunno if that helps.

**vanman** · 15-02-2009, 08:42 PM

Crowncustoms numbers match the workshop manul for 4AC, don't know about 4AG variants though... 4AC asked for though...

Should still have the pages around for the order in which to do them if you really need it, although it is pretty much ok to set them anytime they are not on the cam lobe...

Cheers
Vanman