Oil cooler fittings 1/2in NPT to M10??

**Macross** · 01-02-2009, 02:55 PM

I'm looking for a male 1/2in NPT to male M10 fitting for my oil cooler, but am having an absolute devil of a time finding someone who would make them, I'm sure someone does as there is a million different places that sell these sorts of things but google is proving useless in this matter.

So, does anyone know where I could buy this fitting from, or failing that, somewhere that would make them custom for me?

**fixeruperer** · 01-02-2009, 04:53 PM

earls would do one.
ring up enzed or any fittings place, ive bought them before from enzed.

**AAAAGZE** · 01-02-2009, 06:28 PM

enzed or pirtek should have either a one piece fitting, or put two adapter's together to suit your application.

either that, or buy a blanking plug in brass, and then tap it M10 yourself.

piece of piss.

**Macross** · 02-02-2009, 06:23 PM

Thanks guys, I rang Pirtek and they can do it using 2 adaptors, just have to go down there to figure out what sort of M10 fitting I have.

**Cuzzo** · 02-02-2009, 06:52 PM

Could also try MSCN or motor sport connections however they arent the cheapest but id be 99% sure they have what you want.

**rms** · 02-02-2009, 08:04 PM

Why do you want to reduce from 1/2in NPT to 10mm metric male ? - or do you mean 1/2in NPT male to AN-10 adaptor ?

**Major Clod** · 07-02-2009, 02:22 AM

I found speedflow and earls did a bunch of odd sized Metric fittings, but they were usually Metric to AN adaptors.. so I needed to go Metric->AN->NPT etc..

**allencr** · 07-02-2009, 06:23 AM

Originally Posted by rms

Why do you want to reduce from 1/2in NPT to 10mm metric male ? - or do you mean 1/2in NPT male to AN-10 adaptor ?

Exactly! 10mm is pretty small for anything that is full flow And at a distance from the block, no matter what size lines are going to it!
Bypass, Not Full Flow, oil cooler and/or filter?
Turbo feed?