4AGE what do i do with these?

[superjoe284]

hi everyone just wondering where a few hoses that are coming off the intake manifold are meant to go and something a friend called a Christmas tree on the remote thermostat?
was told that i need to plumb the blocked hoses for the engineers certificate but i dunno where they go,

here are pics of what i mean
http://s241.photobucket.com/albums/f...erjoe284/ta22/

thanks in advance
joe

[bmak]

The ones on the throttle body are for power steering. I'd just loop a hose to make it look good.

And i'd remove that christmas tree and put a plug in.

[Mos]

The first one is most likely a temperature switch for the EGR. I'd remove it and fit a blanking bung in it.

The throttle body ones - two (as bmak said) are for the power steering, but if you loop them you will get high idle; and the third runs to the air con idle up valve - buy blanking caps for all three and cap them.

Mos.

[bmak]

Put a ball bearing in the looped hose. Looks more like it meant to be that way

[TERRA Operative]

I pulled the fittings out on the fittings I wasn't using on mine (a pair of pliers and a bit of twisting will do it).
Then I tapped the holes and fitted grub screws with a bit of loctite.

[craigy]

There should be one marked CC, this goes to your charcoal canistor

[superjoe284]

ok thanks a bunch for your responses +rep for all

[frostyadonis]

ive got a spare set of stock block off plugs if youre interested...
i live in inner eastern area (kew) btw