What thread? they should be the same as an AE71 etc but id have to check the length.
i have a rack here so ill check it tomorrow as i need to fit up new boots to it.
cheers
linden
need to replace a rack end for rego, however i have an import ae86 with power steering, does anyone know of a part from a different car that may fit correctly or alternatively where i can get one in a decent time frame (ie not shipped from japan!)?
thanks.
matty.
What thread? they should be the same as an AE71 etc but id have to check the length.
i have a rack here so ill check it tomorrow as i need to fit up new boots to it.
cheers
linden
Originally Posted by WHITCHY
You can buy p/s arms from the parts sponsors of http://www.ae86drivingclub.com.au/board/
Think they go for around 150-200 bucks but they're local and you can get them fast
Sa22c Series 1 rx7, 12a extend port, 900rwkw @ 93,320 rpm sold
Ra65 celica hatch, 22re with 2.25" exhaust, 500Nm @ 27rpm sold
Ae86, 4agze, 170Takumi Powers @ 11,000 rpm
Convert to manual. P/S is for grils
He's not after those though..........he already has a PS armsOriginally Posted by Intense
I'd make a post in the part numbers thread on the site in that link though, someone will look it up for you or may know if another rack end will fit.
toyodiy site.
non-PS is 45503-19015 AE8*..GL, SE, SR, GT, APX 2 $100.33
44503E END SUB-ASSY, STEERING RACK (FOR POWER STEERING)
45503-19015 AE8*..GL, SE, SR, GT, APX 2 $100.33
45503-19025 AE8*..GL, SE, SR, GT, APX 2 $122.68
no idea why there are 2 parts listed, but chances are you can use non-PS ones,
for $100 each.. not that exxy to get from toyota
and this is listed for KE70
45503-19015 KE70E 2 $100.33
45503-19015 KE70E, 73E, AE70E 2 $100.33
edit: $150-200? fark nice way for sponsors to look after the site members... way to go AE86DC
![]()
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
The zenki racks use the same ends as manual steering AE86s, KE70s and AE71s
45503-19015
Kouki ones are less common and will require more effort to find.
45503-19025
I want to do your engine conversion wiring for you, PM me.
what the fuck is Kouki and Zenki? we are in Australia why not say early or late model?
Originally Posted by WHITCHY
is just not cool enough to say early or late
AE86 owner says early and late..
八六 owner says 前期 and 後期(or they wish they could
)
then again, the yanks all say it, and the importers all say it...
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
so which one is which? that way i can refer back to here when some full sik hectic JDMtuning / AE86Dumb****s wanker say's it next time.
How's Japan anyway? still enjoying it? wanting to move back and work on early rolla's yet?
cheers
Originally Posted by WHITCHY
前 = "mae" or "zen" = early, or before
後 = "ato" or "kou" = after or behind/rear
期 = "ki" = period of time
so zenki is early, and kouki is late.....
maybe you can remember it as "old people get kooky with age"
Japan is awesomejust need to get to more car events, plus get the the TE27 tuner garage near here
plus PM..
on topic... so what year did it swap from early to late model? the toyodiy site seems to list them both for all years (that i could be bothered to check?)
anyway, did the aeeedeeem AE86 ever get late model jap parts?
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
Sorry, I'm just used to saying it like that from the AE86 forums.
Basically Zenki is 83-85 and Kouki is 86-87 (In AE86 terms)
Although some late 85's are Kouki, from memory it changed in August of 85 offically.
I want to do your engine conversion wiring for you, PM me.
Bookmarks