Wakefield Park Track Day - Friday 7th of November!

[-GT-]

You win.

I have a loose crank pulley, that may have been loose for, ...a long while. Probably should investigate what damage has been done...

Apart from that, not much.

Edit: Well, there's the ecu install, but we all know that's not going to happen by then, so not much point putting it on the list. Oh and i need to silicon my hektik tailights so they don't fill up with water when it rains. If i think about this much further more stuff will probably surface...

[Roundy]

Mine varies depending on what car i want to/am able to bring

ST162 list is basically:
Get the farken thing going....

ST185 list is:
New wheels and tyres
New radiator to help aid cooling
Maybe an undertray to help aid cooling
Maybe a proper oil cooler to help aid cooling
Maybe a water spray to help aid cooling
Increase the boost to ~12-13psi (omg how will i manage that one) to undo any aid to cooling that may have been achieved

[YLD-16L]

Mine was only covered at the top level too, if I go into detail the list grows much much longer i.e. to refit the diff requires solid round-bar to be turned down into new locating dowels x 4.

The axles need 0.5mm turned down on the spigot OD to locate the new discs.

New tailshaft bolts need to have the length turned down ot the correct length on the lathe.

The HB needs a steel plate mount to be fabricated.

etc etc.


But I try not to focus on the minor details and just think big picture

[JustenGT8]

But I try not to focus on the minor details and just think big picture

Which means there's time to ponder which bolt you forgot to insert as you spear off the end of the straight on a sandy ride to the armco

[YLD-16L]

Corollas only have 8 bolts in the whole car in total so forgetting one is not likely

[JustenGT8]

Corollas only have 8 bolts in the whole car in total so forgetting one is not likely

that would be true...if we weren't talking about Rolla drivers

[YLD-16L]

Corollas are slightly less complicated than a horse drawn cart so that means I don't struggle too much with the technology.

[Cuzzo]

Corollas only have 8 bolts in the whole car in total so forgetting one is not likely

Thats correct!

I had lost two of my 8 at WSID massive weight reduction made it run its old PB. :0

I have a long list too but you guys will freak when you see it at toyofest / wakefield. (I hope)

[YLD-16L]

I have a long list too but you guys will freak when you see it at toyofest / wakefield. (I hope)

I'm going to hide my freak out and act unimpressed just to crush your hopes


Just finished the tedious task of cleaning cleaning cleaning and finally painting my new rear calipers so now they'll be ready for assembly with a new kit through them.

I also "massaged" the diff region of the floor pan to relieve a few diff to floor pan contact points. Then re coated with underbody deadener.

[TIMTAMS]

well...i have to sort out the tapping/knocking noise coming from the engine, Fit the "roadrunner" prepped struts and brakes (coilovers, koni adj, 4 spots etc).

Fix electrical earthing problems

Remove one of the many bump stops out of the rear

Oh no the list just grows!

[-=DV=-]

ill try to be there with my 185...are non toyota owners welcome to come along? ive got a few mates with e30 bmws that would LOVE to participate

[Draven]

Hell yes! Cars of all sorts turn up
there are a couple of beamer regulars, was a ferrari last time, etc etc

[JustenGT8]

The more non toyota's i get to toast the better

[GriZZly]

yay another gt4 ill get to eat up with the beamer .. Bring on the e30s.. ive got a few mates lined up with e30s as well (if they man up and up ) so should be good fun..

[Draven]

too early to make jokes about more beamers going into the tyres at the end of the straight?