new turbo

[LO01UX]

hi all

my turbo shat itself the other day (not due to increased boost) so i need a new one

does any1 know wot kinda would fit??

its a 2.2L turbo diesel, the stud pattern is 4-stud in a rectangular shape 10cm by 4cm

any help would be greatly appreciated as id like to get one asap

cheers

[Norbie]

It's probably a CT20 so nothing will be a direct bolt on but I think a CT26 will go on with minor mods.

[The Real Roadrunner]

and a CT26 wont have a chance in hell of spooling on a 2.2L deisel. already tried it on a 2.8L and it was a no go zone.

see if you can find a turbo off a 2.4L surf as it should be of reasonable build quality.

have you got pics of your turbo or any part number so we know what we are comparing against.

[LO01UX]

Its an ihi turbo. Its an aftermarket one the was put on b4 i got it. I think il need to get the flanges changed though cause its a rectangular 4 stud pattern.

U able to do that kinda stuff linden?

I found twin turbos off a 1g in the classifieds would they work?

[boxh34d]

I'm sure some Mitsubishi's use IHI housings???
Can't you find any numbers on it anywhere, that might help identify it for a replacement??

[The Real Roadrunner]

U able to do that kinda stuff linden?

I found twin turbos off a 1g in the classifieds would they work?

more than capable of doing the work required but in order to keep it as cheap as possible for you i would look at rebuilding your current turbo first. if you can bring it down ill have a look and see what can be done.

i doubt 1g turbos would work as the wheels and trims for a diesel are generally different to what a petrol engine would run.

cheers
linden

[LO01UX]

how much would it cost to rebuild it??

u working 2morow night?? (friday night)

[tomvale13]

IHI turbos are also common in wrx's and sti's.

vf22-vf35 popular on quite a few jap cars.

(I have a vf29)

It looks like Dr Linden has already pescribed some healin' though.