its running beyatch rich, i don't do too much hyway driving, and i boot the wrinkler out of it most of the time..
1200det - one of these..
http://www.4wdsystems.com.au/html/lokka.htm
Good to see its legal![]()
I get 10.1/100km out of my 2JZ. Something must be wrong. But then again I waste flooring it when I got 10.1
its running beyatch rich, i don't do too much hyway driving, and i boot the wrinkler out of it most of the time..
1200det - one of these..
http://www.4wdsystems.com.au/html/lokka.htm
My mate put one in the rear of his 4Runner , Was a Tad noisy when engaging and what a surprise when you recieve it in the mail in a tiny box with two gears LOL.
.
Current Toys
97 Pajero EVOLUTION
04 Lexus ES300
92 Hilux 2wd
well its a bit noisy in carparks.. (probably noisier in car than out) and sometimes engauges with a clunk when coming out of a slow turn like an intersection.. but its most definately positive drive when its goin..
another reason to put a 1j in a hilux..
http://video.google.com/videoplay?do...0&q=motorkhana
That rear end flops around a bit doesn't it? Is it still the stock leaf suspension with blocks or something more?
[Project] 'Bugger' - 1999 Toyota Hilux Turbo Ute - PB: [email protected] 1.857 60FT Video
[Project] 'Red Baron' - 1990 Toyota Celica GT-Four - PB: [email protected] 1.869 60Ft Video
Technical Articles Database 3S-GTE/ST185/Celica - BGB,EPC,Tech || 2RZ/3RZ/5VZ/Hilux - FSM
So far this project is pretty encouraging for doing the 1J conversion I think!
More pics, love the brakes!
lance: stock leaves (which are pretty heavy, but not as heavy as non-sr5 versions) and heavy duty shocks.. new ones.. no blocks.. i hate blocks.. i think it would twist the springs into pretzels if it had blocks..
cheers youngy![]()
Any pics of the engine mounts?
i stuck a 7mgt in my 4runner and loved it...broke everything i fitted to it but loved it all the same.my only advice is have a 9" diff fitted and a built box either a a340 with big internals or mark4 poopra 6speed.have fun matey thats what its all about.......
Just picked up one of these puppies myself but unfortunately it's currently full of a warmed over 308....UZ goodness as soon as i can but sure i can pick up some tips here![]()
Lily Simpson 6.7.2010
R.I.P.
Considered just putting injection on the 308? (ow ow stop hitting me dang toyota zealots)
It would be more expensive to do that than a UZ conversion. Plus, even though this engine has all the fruit (rolla rockers etc) it's still a pushrod PoS![]()
Lily Simpson 6.7.2010
R.I.P.
cough up the goss on the 308?
worthy of a bit of ed-love once its out? could find 100 things cheap and nasty to put it into![]()
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
would probably go better though![]()
Bookmarks