Results 1 to 6 of 6

Thread: Toyota Flywheel FAQ.... (TFF#)

  1. 26-02-2006, 05:16 PM #1
    CrUZida
    CrUZida is offline
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Toyota Flywheel FAQ.... (TFF#)

    Ok, its time to start a thread about flywheels.

    What sizes are they, bolt pattern, weights etc.
    Then we will know what is compatible with what.

    PLEASE DO NOT post in this thread without a picture, as I have done.
    Without pictures it could be mere speculation, and you may be remembering incorrectly.

    Mods could you please delete any irrelevant/guessing material as I'd like to keep this thread 100% facts.

    I shall lead by example
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS
    Reply With Quote Reply With Quote
  2. 26-02-2006, 05:16 PM #2
    CrUZida
    CrUZida is offline
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: Toyota Flywheel FAQ.... (TFF#)



    Last edited by CrUZida; 26-02-2006 at 07:08 PM.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS
    Reply With Quote Reply With Quote
  3. 26-02-2006, 05:47 PM #3
    YelloRolla
    YelloRolla is offline
    Sucks to be a Domestic Engineer YelloRolla's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    598

    Default Re: Toyota Flywheel FAQ.... (TFF#)

    I suggest that posting the PCD for the pressure plate mounting and dowel holes (this would assist people with clutch interchageability). Sorry for OT reply.
    YelloRolla's KE20 1/4mi = 11.32 @ 119mph @ 22psi on slicks
    12.44 @ 113 mph on 165 wide street tyres
    210rwkw - not bad for a smelly 3TGTE running pump fuel.
    Reply With Quote Reply With Quote
  4. 26-02-2006, 06:34 PM #4
    CrUZida
    CrUZida is offline
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: Toyota Flywheel FAQ.... (TFF#)

    I did think about that, but I could only measure it with a tape measure, would that be good enough?
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS
    Reply With Quote Reply With Quote
  5. 26-02-2006, 07:09 PM #5
    CrUZida
    CrUZida is offline
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: Toyota Flywheel FAQ.... (TFF#)

    Updated with pressure plate PCD to best of my measurement.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS
    Reply With Quote Reply With Quote
  6. 27-02-2006, 08:41 AM #6
    YelloRolla
    YelloRolla is offline
    Sucks to be a Domestic Engineer YelloRolla's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    598

    Default Re: Toyota Flywheel FAQ.... (TFF#)

    Quote Originally Posted by CrUZida
    I did think about that, but I could only measure it with a tape measure, would that be good enough?
    it probably is.

    The other way to do it is to measure from dowel to dowel with a pair of verniers and then do some trigonometry.
    YelloRolla's KE20 1/4mi = 11.32 @ 119mph @ 22psi on slicks
    12.44 @ 113 mph on 165 wide street tyres
    210rwkw - not bad for a smelly 3TGTE running pump fuel.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Front Shock Absorber Dimensions...
    By ed in forum Tech and Conversions
    Replies: 10
    Last Post: 18-10-2005, 01:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules