4AGE 100kw - water connections

[Grega]

Folks

I need some help please, with my 100kw setup.
I've got the standard water fitting attached to my gearbox - front pipe goes to bottom rad hose, one off on an angle goes to the back of the water pump, one of the heater hoses goes to the other, but, I'm left with the following :

1. I have a pipe that comes off the top of the head (from the front on the inlet manifold)
2. I have the pipe that comes from the heater core
3. I have one connection left on that water fitting (atop the gearbox)

A pic tells a thousand words :


(circled thing on the right is part of the water fitting, thing on the left is from that back of the head (bypass i think)


to put in all into perspective, heater hose on the firewall shown thats not connected, circled thing lower right is outlet on the water fitting, lower left is the pipe that comes from the top of the head.

is the pipe perhaps tee'd to go between the heater core and pipe?

Help please

[Grega]

from karls FWD to RWD 100kw gig



i forgot about the outlet on the back of the head :rollseyes:

my question is this
does the little pipe (under the inlet manifold from top water outlet in head) go to the heater core or to the water fitting on the top of the gearbox (i'm debating this with too_quick on MSN at the moment)

tareee

[too_quick]

I have the hose going from the back of the head to the heater tap.
One hose from the heater core to the thermostat housing.